



@article {2406,
	title = {Adsorption of albumin on prosthetic materials: Implication for tribological behavior},
	journal = {Journal of Biomedical Materials Research - Part AJ. Biomed. Mater. Res. Part A},
	volume = {78},
	year = {2006},
	note = {Cited By (since 1996): 25Export Date: 21 November 2012Source: ScopusCODEN: JBMRCdoi: 10.1002/jbm.a.30754PubMed ID: 16739106Language of Original Document: EnglishCorrespondence Address: Serro, A.P.; Centro de Qu{\'\i}mica Estrutural, Instituto Superior T{\'e}cnico, Av. Rovisco Pais, 1049-001 Lisboa, Portugal; email: anapaula.serro@ist.utl.ptChemicals/CAS: aluminum oxide, 1302-74-5, 1318-23-6, 1344-28-1, 14762-49-3; iodine 125, 14158-31-7, 22822-81-7; molybdenum, 7439-98-7; protein, 67254-75-5; stainless steel, 12597-68-1; Albumins; Biocompatible MaterialsTradenames: CHIRULEN, Poly Hi Solidur, GermanyManufacturers: Maret, Switzerland; MediMet, Germany; Poly Hi Solidur, GermanyReferences: Widmer, M.R., Heuberger, M., V{\"o}r{\"o}s, J., Spencer, N.D., Influence of polymer surface chemistry on frictional properties under protein-lubrication conditions: Implications for hip-implant design (2001) Tribol Lett, 10, pp. 111-116;Saikko, V., Effect of lubricant protein concentration on the wear of ultrahigh molecular weight polyethylene sliding against a CoCr counterface (2003) Trans ASME, 125, pp. 638-642; 
Sawae, Y., Murakami, T., Chen, J., Effect of synovia constituents on friction and wear of ultra-high molecular weight polyethylene sliding against prosthetic joint materials (1998) Wear, 216, pp. 213-219; 
Kumar, P., Oka, M., Ikeuchi, K., Shimizu, K., Yamamuro, T., Okumura, H., Kotoura, Y., Low wear rate of UHMWPE against zirconia ceramic (Y-PSZ) in comparison to alumina ceramic and SUS 316L alloy (1991) J Biomed Mater Res, 25, pp. 813-828; 
Kitano, T., Ateshian, G.A., Mow, V.C., Kadoya, Y., Yamano, Y., Constituents and pH changes in protein rich hyaluronan solution affect the biotribological properties of artificial cartilage (2001) J Biomech, 34, pp. 1031-1037; 
Gispert, M.P., Serro, A.P., Cola{\c c}o, R., Saramago, B., Friction and wear mechanisms in hip prosthesis: Comparison of joint materials behaviour in several lubricants (2006) Wear, 260, pp. 149-158; 
Van Enckevort, H.J., Dass, D.V., Langdon, A.G., The adsorption of bovine serum albumin at the stainless-steel/aqueous solution interface (1984) J Colloid Interface Sci, 98, pp. 138-143; 
Fukuzaki, S., Urano, H., Nagata, K., Adsorption of protein onto stainless-steel surfaces (1995) J Ferment Bioeng, 80, pp. 6-11; 
Rubio, C., Costa, D., Bellon-Fontaine, M.N., Relkin, P., Pradier, C.M., Marcus, P., Characterization of bovine serum albumin adsorption on chromium and AISI 304 stainless steel, consequences for the Pseudomonas fragi K1 adhesion (2002) Colloid Surf B Biointerface, 24, pp. 193-205; 
Sakiyama, T., Tomura, J., Imamura, K., Nakanishi, K., Adsorption characteristics of bovine serum albumin and its peptide fragments on a stainless steel surface (2004) Colloid Surf B Biointerface, 33, pp. 77-84; 
Fukuzaki, S., Urano, H., Yamaguchi, T., Effect of modification of alumina surfaces by ozone on adsorption behaviour of bovine serum albumin at alumina-water interfaces (1997) J Ferment Bioeng, 84, pp. 407-413; 
Urano, H., Fukuzaki, S., Conformation of adsorbed bovine serum albumin governing its desorption behavior at alumina-water interfaces (2000) J Ferm Bioeng, 90, pp. 105-110; 
Williams, R.L., Williams, D.F., Albumin adsorption on metal surfaces (1998) Biomaterials, 9, pp. 206-212; 
Haynes, C.A., Norde, W., Globular proteins at solid/liquid interfaces (1994) Colloid Surf B Biointerface, 2, pp. 517-566; 
Owens, D.K., Wendt, R.C., Estimation of the surface free energy of polymers (1969) J Appl Polym Sci, 13, pp. 1741-1747; 
Michalski, M.C., Hardy, J., Saramago, B., On the surface tension of PVC/EVA polymer blends: Comparison of different calculation methods (1998) J Colloid Interface Sci, 208, pp. 319-328; 
Cheng, P., Li, D., Boruvka, L., Rotenberg, Y., Neumann, A.W., Automation zof axisymmetric drop shape analysis for measurements of interfacial tensions and contact angles (1990) Colloid Surf, 43, pp. 151-197; 
Cheng, P., Neumann, A.W., Computational evaluation of Axisymmetric Drop Shape Analysis - Profile (ADSA-P) (1992) Colloid Surf, 62, pp. 297-306; 
(1990) Practical Surface Analysis, Vol. 1: Auger and X-Ray Photoelectron Spectroscopy, 1. , Briggs D, Seah MP, editors. Cichester: Wiley; 
Lima, J., Sousa, S.R., Ferreira, A., Barbosa, M.A., Interactions between calcium, phosphate, and albumin on the surface of titanium (2001) J Biomed Mater Res, 55, pp. 45-53; 
(1993) Iodine-125, a Guide to Radioiodination Techniques, p. 64. , Little Chalfont, Buckinghamshire, UK: Amersham Life Science; 
Feng, L., Andrade, J.D., Protein adsorption on low temperature isotropic carbon. III. Isotherms, competitivity, desorption and exchange of albumin and fibrinogen (1994) Biomaterials, 15, pp. 323-333; 
Paynter, R.W., Ratner, B.D., Horbett, T.A., Thomas, H.R., XPS studies on the organization of adsorbed protein films on fluoropolymers (1984) J Colloid Interface Sci, 101, pp. 233-245; 
Paynter, R.W., Ratner, B.D., The study of interfacial proteins and biomolecules by X-ray photoelectron spectroscopy (1985) Surface and Interfacial Aspects of Biomedical Polymers, Vol. 2: Protein Adsorption, 2, pp. 189-216. , Andrade JD, editor. New York: Plenum; 
Seah, M.P., Dench, W.A., Quantitative electron spectroscopy of surfaces: A standard data base for electron inelastic mean free paths in solids (1979) Surf Interface Anal, 1, pp. 2-11; 
Tanuma, S., Powell, C.J., Penn, D.R., Calculations of electron inelastic mean free paths. II. Data for 27 elements over the 50-2000 eV range (1991) Surf Interface Anal, 17, pp. 911-926; 
Carter, D.C., He, X.M., Munson, S.H., Twigg, P.D., Gernet, K.M., Broom, M.B., Miller, T.Y., Three-dimensional structure of human serum albumin (1989) Science, 244, pp. 1195-1198; 
Pradier, C.M., Costa, D., Rubio, C., Comp{\`e}re, C., Marcus, P., Role of salts on BSA adsorption on stainless steel in aqueous solutions. I. FT-IRRAS and XPS characterization (2002) Surf Interface Anal, 34, pp. 50-54; 
Lori, J.A., Hanawa, T., Adsorption characteristics of albumin on gold and titanium metals in Hanks{\textquoteright} solution using EQCM (2004) Spectroscopy, 18, pp. 545-552; 
Sousa, S.R., Moradas-Ferreira, P., Saramago, B., Melo, L.V., Barbosa, M.A., Human serum albumin adsorption on TiO 2 from single protein solutions and from plasma (2004) Langmuir, 20, pp. 9745-9754; 
Uyen, H.M.W., Schakenraad, J.M., Sjollema, J., Noordmans, J., Jongebloed, W.L., Stokroos, I., Busscher, H.J., Amount and different surface structure of albumin adsorbed to solid substrata with different wettabilities in a parallel plate flow cell (1990) J Biomed Mater Res, 24, pp. 1599-1614; 
Young, B.R., Pitt, W.G., Cooper, S.L., Protein adsorption on polymeric biomaterials. II. Adsoption kinetics (1988) J Colloid Interface Sci, 125, pp. 246-260; 
Dulm, P.V., Norde, W., The adsorption of human plasma albumin on solid surfaces, with special attention to the kinetic aspects (1983) J Colloid Interface Sci, 91, pp. 248-255; 
Malmsten, M., Formation of adsorbed protein layers (1998) J Colloid Interface Sci, 207, pp. 186-199; 
Smith, I.O., Baumann, M.J., McCabe, L.R., Electrostatic interactions as a predictor for osteoblast attachment to biomaterials (2004) J Biomed Mater Res A, 70, pp. 436-441
},
	month = {2006///},
	pages = {581 - 589},
	abstract = {The orthopedic prosthesis used to substitute damaged natural joints are lubricated by a pseudosynovial fluid that contains biological macromolecules with potential boundary lubrication properties. Proteins are some of those macromolecules whose role in the lubrication process is not yet completely understood. In a previous work, we investigated the influence of the presence of albumin, the major synovial protein, upon the tribological behavior of three of the most used pairs of artificial joint materials: ultra high molecular weight polyethylene (UHMWPE) against counterfaces of alumina, CoCrMo alloy, and 316L stainless steel. Albumin was found to cause a significant decrease in the friction coefficient when the counterfaces were metallic because transfer of UHMWPE was avoided, but this effect was much weaker in the case of alumina. The objective of the present work was to look for an explanation for these differences in tribological behavior in terms of albumin adsorption. With this goal, studies on adsorption of bovine serum albumin (BSA) on the counterface materials, from a biological model fluid (Hanks{\textquoteright} balanced salt solution), were carried out using radiolabeled albumin (                        125I-BSA), X-ray photoelectron spectroscopy, and atomic force microscopy. The conclusion from all techniques is that the driving force for albumin adsorption is higher on the metals than on alumina. These results confirm that the greater the amount of protein adsorbed on the counterface, the more efficient is the protection against the transfer of polymeric film to the counterface. {\textcopyright} 2006 Wiley Periodicals, Inc.
},
	keywords = {Adsorption, Albumin, Albumin adsorption, Albumins, Alumina, aluminum oxide, article, Atomic force microscopy, balanced salt solution, Biocompatible Materials, Body fluids, bovine serum albumin, chromium derivative, Cobalt alloy, Cobalt alloys, cobalt derivative, force, Friction, iodine 125, isotope labeling, joint fracture, Joints (anatomy), lubrication, macromolecule, metal, molecular weight, molybdenum, orthopedic prosthesis, orthopedics, Polyethylenes, polymer, Prostheses and Implants, prosthesis material, Prosthetics, protein, Proteins, Pseudosynovial fluid, Stainless steel, Thermodynamics, Tribology, ultra high molecular weight polyethylene, Ultra high molecular weight polyethylene (UHMWPE), X ray photoelectron spectroscopy},
	isbn = {00219304 (ISSN)},
	url = {http://www.scopus.com/inward/record.url?eid=2-s2.0-33747426950\&partnerID=40\&md5=1728518c691365be3d5b3733dec3d60f},
	author = {Serro, A.P. and Gispert, M.P. and Martins, M.C.L. and Brogueira, P. and Cola{\c c}o, R. and Saramago, B.}
}
