



@book {2485,
	title = {Effects of some variables on R.F. Magnetron Sputtered Hydroxyapatite Coatings on Titanium},
	series = {Key Engineering MaterialsKey Eng Mat},
	volume = {254-256},
	year = {2004},
	note = {Conference code: 62053Export Date: 21 November 2012Source: ScopusCODEN: KEMAELanguage of Original Document: EnglishCorrespondence Address: Silva, R.A.; Inst. Sup. de Engenharia do Porto, Rua Dr. Antonio Bernardino A., 431, 4200-072 Porto, Portugal; email: ras@isep.ipp.ptReferences: Hing, K.A., Best, S.M., Tanner, K.E., Bonfield, W., Revell, P.A., (1997) Journal of Materials Science: Materials in Medicine, 8, pp. 731-736;Raynaud, S., Champion, E., Bernache-Assolant, D., Tetard, D., (1998) Journal of Materials Science: Materials in Medicine, 9, pp. 221-227; 
Weng, J., Liu, X., Zhang, X., De Groot, K., (1996) Journal of Biomedical Materials Research, 30, pp. 5-11; 
Gross, K.A., Gross, V., Berndt, C.C., (1998) Journal of the American Ceramic Society, 81 (1), pp. 106-112; 
Edwards, J.T., Brunski, J.B., Higuchi, (1997) Journal of Biomedical Materials Research, 36, pp. 454-468; 
Yang, C.Y., Lin, R.M., Wang, B.C., Lee, T.M., Chang, E., Hang, Y.S., Chen, P.Q., (1997) Journal of Biomedical Materials Research, 37, pp. 335-345; 
Ogiso, M., Yamamura, M., Kuo, P.T., Borgese, D., Matsumoto, T., (1998) Journal of Biomedical Materials Research, 39, pp. 364-372; 
Van Dijk, K., Schaeken, H.G., Wolke, J.G.C., Maree, C.H.M., Habraken, F.H.P.M., Jansen, J.A., (1995) Materials in Clinical Applications, pp. 249-256. , P. Vincenzini, (ed.); 
Yoshinari, M., Hayakawa, T., Wolke, J.G.C., Nemoto, K., Jansen, J.A., (1997) Journal of Biomedical Materials Research, 37, pp. 60-67; 
Wolke, J.G.C., De Groot, K., Jansen, J.A., (1998) Journal of Biomedical Materials Research, 39, pp. 524-530
},
	month = {2004///},
	pages = {323 - 326},
	address = {Porto},
	abstract = {RF sputtering may be used to produce thin, well adherent bioactive coatings with long term stability to ensure contact with bone tissue. RF Sputtered Hydroxyapatite (HA) coatings were produced onto Ti at 200 and 150 W. S.E.M. analysis indicated that films obtained with 200 W were thicker than those with 150 W. Significant variations were observed, depending on the location of the substrates with respect to the sample holder in the sputtering chamber, with thickness ranging from 1.8 to 3.2 μm. EDS analysis of 200 W films revealed the presence of Ca and P, in ratios typical of HA. XPS of thinner films obtained at 150 W, showed Ca and P, but also some carbonate probably partially substituting OH. Anodic polarisation curves of samples coated at 200 W and 150 W and for different sputtering times, compared to Ti substrate, indicate that HA films were protective and that the degree of protection increased with film thickness, i.e., with power intensity and time of deposition.},
	keywords = {Bioactive coatings, Bone, Coatings, Corrosion protection, hydroxyapatite, Magnetron sputtering, Plasma spraying, Polarization, RF sputtering, Scanning electron microscopy, Sputter deposition, Sputtering chambers, Thin films, Titanium},
	isbn = {10139826 (ISSN)},
	url = {http://www.scopus.com/inward/record.url?eid=2-s2.0-0347659048\&partnerID=40\&md5=3b3caf6fcde1c71242d25a74b296f870},
	author = {Silva, R.A. and Sousa, M. and Monteiro, F.J. and Barral, R. and Santos, J.D. and Lopes, M.A.},
	editor = {Barbosa M.A. and Monteiro F.J. and Correia R. and Leon B.}
}
