



@article {2603,
	title = {Influence of substrate material and surface finishing on the morphology of the calcium-phosphate coating},
	journal = {Journal of Biomedical Materials ResearchJ. BIOMED. MATER. RES.},
	volume = {36},
	year = {1997},
	note = {Cited By (since 1996): 11Export Date: 21 November 2012Source: ScopusCODEN: JBMRBdoi: 10.1002/(SICI)1097-4636(199707)36:1<85::AID-JBM10>3.0.CO;2-IPubMed ID: 9212392Language of Original Document: EnglishCorrespondence Address: Leitao, E.; INEB, FEUP, Praca do Coronel Pacheco 1, 4050 Porto, PortugalChemicals/CAS: Alloys; alpha-tricalcium phosphate; Aluminum, 7429-90-5; Biocompatible Materials; calcium phosphate, 10103-46-5; Calcium Phosphates; dicalcium phosphate anhydrous, 7757-93-9; Hanks Balanced Salt Solution; Iron, 7439-89-6; Isotonic Solutions; monocalcium phosphate; Stainless Steel, 12597-68-1; tetracalcium phosphate; titanium alloy (TiAl6V4), 12743-70-3; Titanium, 7440-32-6References: Fujishiro, Y., Sato, T., Okuwaki, A., Coating of hydroxyapatite on metal plates using thermal dissociation of calcium-EDTA chelate in phosphate solutions under hydrothermal conditions (1995) Mater. Sci. Mater. Med., 6, pp. 172-176;Shirkhanzadeh, M., Calcium phosphate coatings prepared by electrocrystallization from aqueous electrolytes (1995) J. Mater, Sci. Mater. Med., 6, pp. 90-93; 
De Groot, K., Ceramics of calcium phosphates (1983) Bioceramics of Calcium Phosphates, p. 100. , K. de Groot (ed.), CRC Press, Boca Raton, FL; 
Leit{\~a}o, E., Barbosa, M.A., De Groot, K., In vitro calcification of orthopaedic implant materials (1995) J. Mater. Sci. Mater. Med., 6, pp. 849-852; 
Ducheyne, P., Radin, S., Ishikawa, K., The rate of calcium phosphate precipitation on metal and ceramics, and the relationship to bioactivity (1992) Bone Bonding Biomaterials, pp. 213-218. , P. Ducheyne, T. Kokubo, and C. A. van Blitterswijk (eds.), Reed Heathcare Communications, The Netherlands; 
Li, P., (1993) In Vitro and in Vivo Calcium Phosphate Induction on Gel Oxides, , Ph.D. thesis, Leiden University; 
Kokubo, T., Bioactivity of glasses and glass ceramics (1992) Bone Bonding Biomaterials, pp. 31-46. , P. Ducheyne, T. Kokubo, and C. A. van Blitterswijk (eds.), Reed Healthcare Communications, The Netherlands; 
Kokubo, T., Tanahashi, M., Yao, T., Minoda, M., Miyamoto, T., Nakamura, T., Yamamuro, T., Apatitepolymer composites prepared by biomimetic process: Improvement of adhesion of apatite to polymer by glow-discharge treatment (1993) Bioceramics, 6, pp. 327-332. , P. Ducheyne and D. Christiansen (eds.), Butterworth-Heinemann, Oxford, United Kingdom; 
Hanawa, T., Titanium and its oxide film: A substrate for forming apatite (1991) Proceedings of the Bone Biomaterial Interface Workshop, pp. 49-61. , Toronto, Dec., 1990, J. E. Davies (ed.), University of Toronto Press, Toronto, Canada; 
Hanawa, T., Ota, M., Calcium phosphate naturally formed on titanium in electrolyte solution (1991) Biomaterials, 12, pp. 767-774; 
Hanawa, T., Ota, M., Characterization of surface film formed on titanium in electrolyte using XPS (1992) Appl. Surface Sci., 55, pp. 269-276; 
Radin, S.R., Ducheyne, P., The effect of calcium phosphate ceramic composition and structure on in vivo behavior. II. Precipitation (1993) J. Biomed. Mater. Res., 27, pp. 35-45
},
	month = {1997///},
	pages = {85 - 90},
	publisher = {John Wiley \& Sons Inc},
	abstract = {The formation of an apatite-like layer was achieved by immersing Ti- 6A1-4V, Ti-A1-2.5Fe, and 316 L stainless-steel substrata in Hank{\textquoteright}s balanced salt solution (HBSS). The layer was characterized by surface analysis techniques, namely, X-ray microanalysis and X-ray diffraction, and the morphology was observed by scanning electron microscopy and atomic force microscopy. The concentrations of Ca and P were monitored as a function of time. The morphology of the precipitate layer seems to be dependent both on the type of metal substrate and its surface finish. Polished Ti-6A1-4V and Ti-A1-2.5Fe surfaces exhibit a plate precipitate morphology, whereas rougher surfaces show scattered crystal-like precipitation. The results suggest that the layer produced by immersion of polished titanium alloys in HBSS is constituted by an amorphous apatite.The formation of an apatite-like layer was achieved by immersing Ti-6Al-4V, Ti-Al-2.5Fe, and 316 L stainless-steel substrata in Hank{\textquoteright}s balanced salt solution (HBSS). The layer was characterized by surface analysis techniques, namely, X-ray microanalysis and X-ray diffraction, and the morphology was observed by scanning electron microscopy and atomic force microscopy. The concentrations of Ca and P were monitored as a function of time. The morphology of the precipitate layer seems to be dependent both on the type of metal substrate and its surface finish. Polished Ti-6Al-4V and Ti-Al-2.5Fe surfaces exhibit a plate precipitate morphology, whereas rougher surfaces show scattered crystal-like precipitation. The results suggest that the layer produced by immersion of polished titanium alloys in HBSS is constituted by an amorphous apatite.
},
	keywords = {Alloys, Aluminum, Aluminum alloys, article, Biocompatibility, Biocompatible Materials, biomaterial, Calcium Compounds, calcium phosphate, Calcium phosphate coatings, Calcium phosphates, Coatings, Finishing, Humans, hydroxyapatite, Implants (surgical), Iron, Isotonic Solutions, materials testing, metal implantation, Microscopy, Electron, Scanning, morphology, Phosphates, Stainless steel, Surface Properties, surface property, Surface testing, Surface treatment, Time Factors, Titanium, Titanium alloys, X ray diffraction, X ray diffraction analysis},
	isbn = {00219304 (ISSN)},
	url = {http://www.scopus.com/inward/record.url?eid=2-s2.0-0031195147\&partnerID=40\&md5=07a9f4ca9de83fbb3c66a25cfea71228},
	author = {Leit{\~a}o, E. and Barbosa, M.A. and De Groot, K.}
}
