



@article {2265,
	title = {Characterization of two DLC coatings for joint prosthesis: The role of albumin on the tribological behavior},
	journal = {Surface and Coatings TechnologySurf. Coat. Technol.},
	volume = {204},
	year = {2010},
	note = {Cited By (since 1996): 6Export Date: 21 November 2012Source: Scopusdoi: 10.1016/j.surfcoat.2010.04.022Language of Original Document: EnglishCorrespondence Address: Serro, A.P.; Centro de Qu{\'\i}mica Estrutural, Complexo I, Instituto Superior T{\'e}cnico, Av. Rovisco Pais, TU Lisbon, 1049-001 Lisboa, Portugal; email: anapaula.serro@ist.utl.ptReferences: Donnet, C., Erdemir, A., (2009), Springer Science \& Business Media, New YorkGutensohn, K., Beythien, C., Bau, J., Fenner, T., Grewe, P., Koester, R., Padmanaban, K., Kuehnl, P., (2000) Thromb. Res., 99, p. 577;Cadosch, D., Chan, E., Gautschi, O.P., Simmen, H.-P., Filgueira, L., (2009) J. Orthop. Res., 27, p. 841; 
Gillespie, W.L., Frampton, C.M.A., Henderson, R.J., Ryan, P.M., (1988) J. Bone Joint Surg. Br., 70 (4), p. 539; 
Roy, R.K., Lee, K.-R., (2007) J. Biomed. Mater. Res. B Appl. Biomater., 83 B (1), p. 72; 
Alakoski, E., Tiainen, V.-M., Soininen, A., Konttinen, Y.T., (2008) Open Orthop. J., 2, p. 43; 
Fisher, J., Firkins, P., Reeves, E.A., Hailey, J.L., Isaac, G.H., (1995) Proc. Inst. Mech. Eng., 209, p. 263; 
Sheeja, D., Tay, B.K., Lau, S.P., Nung, L.N., (2001) Surf. Coat. Technol., p. 410; 
Tiainen, V.-M., (2001) Diamond Relat. Mater., 10 (2), p. 153; 
O{\~n}ate, J.I., Comin, M., Braceras, I., Garcia, A., Viviente, J.L., Brizuela, M., Garagorri, N., Alava, J.I., (2001) Surf. Coat. Technol., p. 1056; 
Shi, B., Ajayi, O.O., Fenske, G., Erdemir, A., Liang, H., (2003) Wear, 255, p. 1015; 
Lappalainen, R., Selenius, M., Anttila, A., Konttinen, Y.T., Santavirta, S.S., (2003) J. Appl. Biomater., 66 B, p. 410; 
Sheeja, D., Tay, B.K., Nung, L.N., (2004) Diamond Relat. Mater., 13, p. 184; 
Xu, T., Pruitt, L., (1999) J. Mater. Sci. Mater. Med., 10, p. 83; 
Lappalainen, R., Anttila, A., Heinonen, H., (1998) Clin. Orthop., 352, p. 118; 
Saikko, V., Ahlroos, T., Calonius, O., Ker{\"a}nen, J., (2001) Biomaterials, 22, p. 1507; 
Sheeja, D., Tay, B.K., Lau, S.P., Nung, L.N., (2001) Surf. Coat. Technol., 146, p. 410; 
Affatato, S., Frigo, M., Toni, A., (2000) J. Biomed. Mater. Res., 53 (3), p. 221; 
Scholes, S.C., Unsworth, A., Goldsmit, A.A.J., (2000) Phys. Med. Biol., 45, p. 3721; 
Ahlroos, T., Saikko, V., (1997) Wear, 211, p. 113; 
Fedel, M., Motta, A., Maniglio, D., (2009) J. Biomed. Mater. Res., 90 B (1), p. 338; 
Lousiniana, S., Logothetidis, S., Laskarakisa, A., Gioti, M., (2007) Biomolec. Eng., 24 (1), p. 107; 
Li, B.G., Kang, Y.Q., Yin, G.F., Zheng, C.Q., (2007) Key Eng. Mater. High-Performance Ceram. IV, p. 1814; 
Fenske, G.R., (2009) Presented to Chicago Section STLE meeting, , M; 
Eryilmaz, O.L., Erdemir, A., (2008) Surf. Coat. Technol., 203, p. 750; 
Gerwin, N., Hops, C., Lucke, A., (2006) Adv. Drug Deliv. Rev., 58 (2), p. 226; 
Visco, A.M., Torrisi, L., Campo, N., Emanuele, U., Trifiro, A., Trimarchi, M., (2009) J. Biomed. Mater. Res. B Appl. Biomater., 89 B, p. 55; 
Ferrari, A.C., Robertson, J., (2001) Phys. Rev. B, 64, p. 75414; 
Ferrari, A.C., Robertson, J., (2000) Phys. Rev. B, 61, p. 14095; 
Zhou, B., Prorok, B.C., Erdemir, A., Eryilmaz, O., (2007) Diamond Relat. Mater., 16, p. 342; 
Zhou, B., Prorok, B.C., Erdemir, A., Eryilmaz, O., (2006) Diamond Relat. Mater., 15, p. 2051; 
Beeman, D., Silverman, J., Lynds, R., Anderson, M.R., (1984) Phys. Rev. B., 30 (2), p. 870; 
Cola{\c c}o, R., Serro, A.P., Eryilmaz, O.L., Erdemir, E., (2009) J. Phys. D Appl. Phys., 42, p. 85307; 
Paul, R., Das, S.N., Dalui, S., Gayen, R.N., Roy, R.K., Bhar, R., Pal, A.K., (2008) J. Phys. D Appl. Phys., 41 (5), p. 55309; 
Serro, A.P., Fernandes, A.C., Saramago, B., (1997) Colloids Surf. A Physicochem. Eng. Aspects, 125, p. 209; 
Serro, A.P., Degiampietro, K., Cola{\c c}o, R., Saramago, B., (2010) Saramago, Adsorption of albumin and sodium hyaluronate on UHMWPE: A QCM-D and AFM study, Colloids and Surfaces B: Biointerfaces, 78, p. 1; 
de Feijter, J.A., Benjamins, J., Veer, F.A., (1978) Biopolymers, 17, p. 1759; 
Gispert, M.P., Serro, A.P., Cola{\c c}o, R., Saramago, B., (2008) Surf. Int. Anal., 40 (12), p. 1529; 
Hook, F., Kasemo, B., Nylander, T., Fant, C., Sott, K., Elwing, H., (2001) Anal. Chem., 73 (24), p. 5796; 
Hook, F., Voros, J., Rodahl, M., Kurrat, R., Boni, P., Ramsden, J.J., Textor, M., Kasemo, B., (2002) Colloids Surf. B Biointerfaces, 24, p. 155; 
Cola{\c c}o, R., Gispert, M.P., Serro, A.P., Saramago, B., (2007) Tribol. Lett., 26 (2), p. 119; 
Gispert, M.P., Serro, A.P., Cola{\c c}o, R., Saramago, B., (2006) Wear, 260, p. 149; 
Serro, A.P., Completo, C., Cola{\c c}o, R., Dos Santos, F., Lobato da Silva, C., Cabral, J.M.S., Ara{\'u}jo, H., Saramago, B., (2009) Surf. Coat. Technol., 203, p. 3701; 
Widmer, M.R., Heuberger, M., V{\"o}r{\"o}s, J., Spencer, N.D., (2001) Tribol. Lett., 10, p. 111; 
Chen, X.M., Jin, Z.M., Fisher, J., (2008) Proc. Inst. Mech. Eng. Part J. Eng. Tribol., 222 (3), p. 513; 
Kumar, P., Oka, M., Ikeuchi, K., Shimizu, K., Yamamuro, T., Okumura, H., Kotoura, Y., (1991) J. Biomater. Mater. Res., 25, p. 813; 
Roba, M., Naka, M., Gautier, E., Spencer, N.D., Crockett, R., (2009) Biomaterials, 30, p. 2072; 
Karuppiah, K.S.K., Sundararajan, S., Xu, Z.-H., Li, X., (2006) Tribol. Lett., 22 (2), p. 181; 
Yang, C.-B., Fang, H.-W., Liu, H.-L., Chang, C.-H., Hsieh, M.-C., Lee, W.-M., Huang, H.-T., (2006) Chem. Phys. Lett., 431, p. 380; 
Fang, H.-W., Wang, H.-C., Tsai, T.-H., Tsai, W.-B., Hou, S.-Y., Liu, H.-L., Lee, W.-H., Huang, C.-H., (2008) J. Appl. Polym. Sci., 108, p. 2428; 
Zappone, B., Rosenberg, K.J., Israelachvili, J., (2007) Tribol. Lett., 26 (3), p. 191; 
Grill, A., (1997) Surf. Coat. Technol., (1-3), p. 507; 
Fontaine, J., Belin, M., Le Mogne, T., Grill, A., (2004) Tribol. Int., 37, p. 869; 
Sanchez-Lopez, J.C., Erdemir, A., Donnet, C., Rojas, T.C., (2003) Surf. Coat. Technol., 163, p. 444; 
Robertson, J., (2002) Mater. Sci. Eng., 37, p. 129
},
	month = {2010///},
	pages = {3451 - 3458},
	abstract = {A commonly used strategy for reduction of wear and friction of the sliding surfaces in prosthetic pairs is the use of hard coatings. DLCs (diamond like carbons) offer a promising solution, because these coatings, already used in other biomedical applications, exhibit a unique combination of chemical inertness, mechanical and tribological properties. In the present work we investigated the role of albumin, the most abundant protein in the periprosthetic fluid, on the tribological behavior of two DLCs with different compositions, against ultra-high molecular weight polyethylene (UHMWPE). The results are compared with those obtained with uncoated stainless steel surfaces. We have characterized the coatings by atomic force microscopy, X-ray diffraction, Raman spectroscopy, ultramicrohardness and wettability measurements. The adsorption of albumin onto the surfaces was investigated by ellipsometry and using a quartz crystal microbalance. Both DLCs adsorb a larger amount of protein than stainless steel. The tribological tests were performed in microtribometer aiming for a deeper understanding of the tribological mechanisms which occur at the submicrometric contact scale. Results showed no significant differences between the tribological behavior of the two coatings. Under the tested conditions, the tribological performance does not improve significantly with the application of the DLCs. Moreover, the presence of albumin on the lubricant leads to higher friction of the polymer against all counterfaces. This effect was attributed to the formation of bridges between the two sliding surfaces by the denaturated protein. The significant differences in the adsorbed amounts of protein onto the stainless steel and the two types of DLCs did not affect considerably the tribological behavior of these materials. {\textcopyright} 2010 Elsevier B.V.},
	keywords = {Adsorbed amount, Adsorption, Albumin adsorption, Atomic force microscopy, Atomic spectroscopy, Biomedical applications, Chemical inertness, Corrosion resistant alloys, Diamond like carbon, DLC coatings, Friction, Hard coatings, Joint prostheses, Mechanical and tribological properties, Mechanical properties, Microtribology, Microtribometer, Nonmetallic matrix composites, Oxide minerals, Polyethylenes, Proteins, Quartz, Raman spectroscopy, Scanning electron microscopy, Sliding surface, Stainless steel, Stainless steel surface, Steel corrosion, Surfaces, Tribological behaviors, Tribological mechanism, Tribological performance, Tribological tests, Tribology, UHMW-PE, UHMWPE, Ultramicrohardness, Wear and friction, Wettability measurements, X ray diffraction},
	isbn = {02578972 (ISSN)},
	url = {http://www.scopus.com/inward/record.url?eid=2-s2.0-77953715334\&partnerID=40\&md5=d724bda7404d809fed9bafb6a5a337e3},
	author = {Carapeto, A.P. and Serro, A.P. and Nunes, B.M.F. and Martins, M.C.L. and Todorovic, S. and Duarte, M.T. and Andr{\'e}, V. and Cola{\c c}o, R. and Saramago, B.}
}
@article {2406,
	title = {Adsorption of albumin on prosthetic materials: Implication for tribological behavior},
	journal = {Journal of Biomedical Materials Research - Part AJ. Biomed. Mater. Res. Part A},
	volume = {78},
	year = {2006},
	note = {Cited By (since 1996): 25Export Date: 21 November 2012Source: ScopusCODEN: JBMRCdoi: 10.1002/jbm.a.30754PubMed ID: 16739106Language of Original Document: EnglishCorrespondence Address: Serro, A.P.; Centro de Qu{\'\i}mica Estrutural, Instituto Superior T{\'e}cnico, Av. Rovisco Pais, 1049-001 Lisboa, Portugal; email: anapaula.serro@ist.utl.ptChemicals/CAS: aluminum oxide, 1302-74-5, 1318-23-6, 1344-28-1, 14762-49-3; iodine 125, 14158-31-7, 22822-81-7; molybdenum, 7439-98-7; protein, 67254-75-5; stainless steel, 12597-68-1; Albumins; Biocompatible MaterialsTradenames: CHIRULEN, Poly Hi Solidur, GermanyManufacturers: Maret, Switzerland; MediMet, Germany; Poly Hi Solidur, GermanyReferences: Widmer, M.R., Heuberger, M., V{\"o}r{\"o}s, J., Spencer, N.D., Influence of polymer surface chemistry on frictional properties under protein-lubrication conditions: Implications for hip-implant design (2001) Tribol Lett, 10, pp. 111-116;Saikko, V., Effect of lubricant protein concentration on the wear of ultrahigh molecular weight polyethylene sliding against a CoCr counterface (2003) Trans ASME, 125, pp. 638-642; 
Sawae, Y., Murakami, T., Chen, J., Effect of synovia constituents on friction and wear of ultra-high molecular weight polyethylene sliding against prosthetic joint materials (1998) Wear, 216, pp. 213-219; 
Kumar, P., Oka, M., Ikeuchi, K., Shimizu, K., Yamamuro, T., Okumura, H., Kotoura, Y., Low wear rate of UHMWPE against zirconia ceramic (Y-PSZ) in comparison to alumina ceramic and SUS 316L alloy (1991) J Biomed Mater Res, 25, pp. 813-828; 
Kitano, T., Ateshian, G.A., Mow, V.C., Kadoya, Y., Yamano, Y., Constituents and pH changes in protein rich hyaluronan solution affect the biotribological properties of artificial cartilage (2001) J Biomech, 34, pp. 1031-1037; 
Gispert, M.P., Serro, A.P., Cola{\c c}o, R., Saramago, B., Friction and wear mechanisms in hip prosthesis: Comparison of joint materials behaviour in several lubricants (2006) Wear, 260, pp. 149-158; 
Van Enckevort, H.J., Dass, D.V., Langdon, A.G., The adsorption of bovine serum albumin at the stainless-steel/aqueous solution interface (1984) J Colloid Interface Sci, 98, pp. 138-143; 
Fukuzaki, S., Urano, H., Nagata, K., Adsorption of protein onto stainless-steel surfaces (1995) J Ferment Bioeng, 80, pp. 6-11; 
Rubio, C., Costa, D., Bellon-Fontaine, M.N., Relkin, P., Pradier, C.M., Marcus, P., Characterization of bovine serum albumin adsorption on chromium and AISI 304 stainless steel, consequences for the Pseudomonas fragi K1 adhesion (2002) Colloid Surf B Biointerface, 24, pp. 193-205; 
Sakiyama, T., Tomura, J., Imamura, K., Nakanishi, K., Adsorption characteristics of bovine serum albumin and its peptide fragments on a stainless steel surface (2004) Colloid Surf B Biointerface, 33, pp. 77-84; 
Fukuzaki, S., Urano, H., Yamaguchi, T., Effect of modification of alumina surfaces by ozone on adsorption behaviour of bovine serum albumin at alumina-water interfaces (1997) J Ferment Bioeng, 84, pp. 407-413; 
Urano, H., Fukuzaki, S., Conformation of adsorbed bovine serum albumin governing its desorption behavior at alumina-water interfaces (2000) J Ferm Bioeng, 90, pp. 105-110; 
Williams, R.L., Williams, D.F., Albumin adsorption on metal surfaces (1998) Biomaterials, 9, pp. 206-212; 
Haynes, C.A., Norde, W., Globular proteins at solid/liquid interfaces (1994) Colloid Surf B Biointerface, 2, pp. 517-566; 
Owens, D.K., Wendt, R.C., Estimation of the surface free energy of polymers (1969) J Appl Polym Sci, 13, pp. 1741-1747; 
Michalski, M.C., Hardy, J., Saramago, B., On the surface tension of PVC/EVA polymer blends: Comparison of different calculation methods (1998) J Colloid Interface Sci, 208, pp. 319-328; 
Cheng, P., Li, D., Boruvka, L., Rotenberg, Y., Neumann, A.W., Automation zof axisymmetric drop shape analysis for measurements of interfacial tensions and contact angles (1990) Colloid Surf, 43, pp. 151-197; 
Cheng, P., Neumann, A.W., Computational evaluation of Axisymmetric Drop Shape Analysis - Profile (ADSA-P) (1992) Colloid Surf, 62, pp. 297-306; 
(1990) Practical Surface Analysis, Vol. 1: Auger and X-Ray Photoelectron Spectroscopy, 1. , Briggs D, Seah MP, editors. Cichester: Wiley; 
Lima, J., Sousa, S.R., Ferreira, A., Barbosa, M.A., Interactions between calcium, phosphate, and albumin on the surface of titanium (2001) J Biomed Mater Res, 55, pp. 45-53; 
(1993) Iodine-125, a Guide to Radioiodination Techniques, p. 64. , Little Chalfont, Buckinghamshire, UK: Amersham Life Science; 
Feng, L., Andrade, J.D., Protein adsorption on low temperature isotropic carbon. III. Isotherms, competitivity, desorption and exchange of albumin and fibrinogen (1994) Biomaterials, 15, pp. 323-333; 
Paynter, R.W., Ratner, B.D., Horbett, T.A., Thomas, H.R., XPS studies on the organization of adsorbed protein films on fluoropolymers (1984) J Colloid Interface Sci, 101, pp. 233-245; 
Paynter, R.W., Ratner, B.D., The study of interfacial proteins and biomolecules by X-ray photoelectron spectroscopy (1985) Surface and Interfacial Aspects of Biomedical Polymers, Vol. 2: Protein Adsorption, 2, pp. 189-216. , Andrade JD, editor. New York: Plenum; 
Seah, M.P., Dench, W.A., Quantitative electron spectroscopy of surfaces: A standard data base for electron inelastic mean free paths in solids (1979) Surf Interface Anal, 1, pp. 2-11; 
Tanuma, S., Powell, C.J., Penn, D.R., Calculations of electron inelastic mean free paths. II. Data for 27 elements over the 50-2000 eV range (1991) Surf Interface Anal, 17, pp. 911-926; 
Carter, D.C., He, X.M., Munson, S.H., Twigg, P.D., Gernet, K.M., Broom, M.B., Miller, T.Y., Three-dimensional structure of human serum albumin (1989) Science, 244, pp. 1195-1198; 
Pradier, C.M., Costa, D., Rubio, C., Comp{\`e}re, C., Marcus, P., Role of salts on BSA adsorption on stainless steel in aqueous solutions. I. FT-IRRAS and XPS characterization (2002) Surf Interface Anal, 34, pp. 50-54; 
Lori, J.A., Hanawa, T., Adsorption characteristics of albumin on gold and titanium metals in Hanks{\textquoteright} solution using EQCM (2004) Spectroscopy, 18, pp. 545-552; 
Sousa, S.R., Moradas-Ferreira, P., Saramago, B., Melo, L.V., Barbosa, M.A., Human serum albumin adsorption on TiO 2 from single protein solutions and from plasma (2004) Langmuir, 20, pp. 9745-9754; 
Uyen, H.M.W., Schakenraad, J.M., Sjollema, J., Noordmans, J., Jongebloed, W.L., Stokroos, I., Busscher, H.J., Amount and different surface structure of albumin adsorbed to solid substrata with different wettabilities in a parallel plate flow cell (1990) J Biomed Mater Res, 24, pp. 1599-1614; 
Young, B.R., Pitt, W.G., Cooper, S.L., Protein adsorption on polymeric biomaterials. II. Adsoption kinetics (1988) J Colloid Interface Sci, 125, pp. 246-260; 
Dulm, P.V., Norde, W., The adsorption of human plasma albumin on solid surfaces, with special attention to the kinetic aspects (1983) J Colloid Interface Sci, 91, pp. 248-255; 
Malmsten, M., Formation of adsorbed protein layers (1998) J Colloid Interface Sci, 207, pp. 186-199; 
Smith, I.O., Baumann, M.J., McCabe, L.R., Electrostatic interactions as a predictor for osteoblast attachment to biomaterials (2004) J Biomed Mater Res A, 70, pp. 436-441
},
	month = {2006///},
	pages = {581 - 589},
	abstract = {The orthopedic prosthesis used to substitute damaged natural joints are lubricated by a pseudosynovial fluid that contains biological macromolecules with potential boundary lubrication properties. Proteins are some of those macromolecules whose role in the lubrication process is not yet completely understood. In a previous work, we investigated the influence of the presence of albumin, the major synovial protein, upon the tribological behavior of three of the most used pairs of artificial joint materials: ultra high molecular weight polyethylene (UHMWPE) against counterfaces of alumina, CoCrMo alloy, and 316L stainless steel. Albumin was found to cause a significant decrease in the friction coefficient when the counterfaces were metallic because transfer of UHMWPE was avoided, but this effect was much weaker in the case of alumina. The objective of the present work was to look for an explanation for these differences in tribological behavior in terms of albumin adsorption. With this goal, studies on adsorption of bovine serum albumin (BSA) on the counterface materials, from a biological model fluid (Hanks{\textquoteright} balanced salt solution), were carried out using radiolabeled albumin (                        125I-BSA), X-ray photoelectron spectroscopy, and atomic force microscopy. The conclusion from all techniques is that the driving force for albumin adsorption is higher on the metals than on alumina. These results confirm that the greater the amount of protein adsorbed on the counterface, the more efficient is the protection against the transfer of polymeric film to the counterface. {\textcopyright} 2006 Wiley Periodicals, Inc.
},
	keywords = {Adsorption, Albumin, Albumin adsorption, Albumins, Alumina, aluminum oxide, article, Atomic force microscopy, balanced salt solution, Biocompatible Materials, Body fluids, bovine serum albumin, chromium derivative, Cobalt alloy, Cobalt alloys, cobalt derivative, force, Friction, iodine 125, isotope labeling, joint fracture, Joints (anatomy), lubrication, macromolecule, metal, molecular weight, molybdenum, orthopedic prosthesis, orthopedics, Polyethylenes, polymer, Prostheses and Implants, prosthesis material, Prosthetics, protein, Proteins, Pseudosynovial fluid, Stainless steel, Thermodynamics, Tribology, ultra high molecular weight polyethylene, Ultra high molecular weight polyethylene (UHMWPE), X ray photoelectron spectroscopy},
	isbn = {00219304 (ISSN)},
	url = {http://www.scopus.com/inward/record.url?eid=2-s2.0-33747426950\&partnerID=40\&md5=1728518c691365be3d5b3733dec3d60f},
	author = {Serro, A.P. and Gispert, M.P. and Martins, M.C.L. and Brogueira, P. and Cola{\c c}o, R. and Saramago, B.}
}
@article {2541,
	title = {Effect of chemical composition on hydrophobicity and zeta potential of plasma sprayed HA/CaO-P                    2O
                    5 glass coatings
},
	journal = {BiomaterialsBiomaterials},
	volume = {22},
	year = {2001},
	note = {Cited By (since 1996): 16Export Date: 21 November 2012Source: ScopusCODEN: BIMADdoi: 10.1016/S0142-9612(01)00059-XPubMed ID: 11603581Language of Original Document: EnglishCorrespondence Address: Santos, J.D.; Laborat{\'o}rio de Biomateriais, Inst. de Engenharia Biomedica (INEB), Rua do Campo Alegre 823, 4150 Porto, Portugal; email: jdsantos@fe.up.ptChemicals/CAS: Calcium Compounds; Durapatite, 1306-06-5; lime, 1305-78-8; Oxides; Phosphorus Compounds; phosphorus pentoxide, 1314-56-3; Serum Albumin, BovineReferences: Klein, C.P.A.T., Patka, P., Van der Lubbe, H.B.M., Plasma-sprayed coatings of tetracalciumphosphate, hydroxyl-apatite, and α-TCP on titanium alloy: An interface study (1991) J Biomed Mater Res, 25, pp. 53-65;Jansen, J.A., Van der Waerden, J.P., Wolke, J.G., Histologic investigation of the biologic behavior of different hydroxyapatite plasma-sprayed coatings in rabbits (1993) J Biomed Mater Res, 14, pp. 603-610; 
Frayssinet, P., Tourenne, F., Rouquet, P., Conte, P., Delga, C., Bonel, G., Comparative biological properties of HA plasma-sprayed coatings having different crystallinities (1994) J Mater Sci: Mater Med, 5, pp. 11-17; 
Courteney-Harris, R.G., Kayser, M.V., Downes, S., Comparison of the early production of extracellular matrix on dense hydroxyapatite and hydroxyapatite-coated titanium in cell and organ culture (1995) Biomaterials, 16, pp. 489-495; 
Labat, B., Chanson, A., Frey, J., Effects of γ-alumina and hydroxyapatite coatings on the growth and metabolism of human osteoblasts (1995) J Biomed Mater Res, 29, pp. 1397-1401; 
De Santis, D., Guerriero, C., Nocini, P.F., Ungersbock, A., Richards, G., Gotte, P., Armato, U., Adult human bone cells derived from jaw bones cultured on plasma-sprayed or polished surfaces to titanium or hydroxyapatite discs (1996) J Mater Sci: Mater Med, 7, pp. 21-28; 
Silva, P.L., Santos, J.D., Monteiro, F.J., Knowles, J.C., Adhesion and microstructural characterisation of plasma-sprayed hydroxyapatite/glass ceramic coatings onto Ti-6Al-4V substrates (1998) Surf Coating Technol, 102, pp. 191-196; 
Ferraz, M.P., Monteiro, F.J., Santos, J.D., CaO-P 2O 5 glass hydroxyapatite double-layer plasma-sprayed coating: In vitro bioactivity evaluation (1999) J Biomed Mater Res, 45, pp. 376-383; 
Ferraz, M.P., Fernandes, M.H., Trigo Cabral, A., Santos, J.D., Monteiro, F.J., In vitro growth and differentiation of osteoblast-like human bone marrow cells on glass reinforced HA plasma-sprayed coatings (1999) J Mater Sci: Mater Med, 10 (9), pp. 567-576; 
Lapin, M., Warocquier-Cl{\'e}rout, R., Legris, C., Degrange, M., Luizard, M.F.S., Correlation between roughness and wettability, cell adhesion and cell migration (1997) J Biomed Mater Res, 36, pp. 99-108; 
Williams, D.F., (1982) Fundamental aspects of biocompatibility, , Boca Raton: CRC Press; 
Adamson, W., (1990) Physical chemistry of surfaces, 5th ed., , New York: Wiley; 
Santos, J.D., Reis, R.L., Monteiro, F.J., Knowles, J.C., Hastings, G.W., Liquid phase sintering of hydroxyapatite by phosphate and silicate glass additions: Structure and properties of the composites (1995) J Mater Sci: Mater Med, 6, pp. 348-352; 
Lopes, M.A., Santos, J.D., Monteiro, F.J., Knowles, J.C., Glass-reinforced hydroxyapatite: A comprehensive study of the effect of glass composition on the crystallography of the composite (1998) J Biomed Mater Res, 39, pp. 244-251; 
Chen, P., Li, D., Boruvka, L., Rotenberg, Y., Neumann, A.W., Automation of axisymmetric drop shape analysis for measurements of interfacial tensions and contact angles (1990) Coll and Surf, 43, pp. 151-197; 
Cheng, P., Neumann, A.W., Computational evaluation of axisymmetric drop shape analysis-profile (ASA-P) (1992) Coll and Surf, 62, pp. 297-306; 
Young, T., (1835) Miscellaneous works, 1, p. 418. , Peacock G, editor. London: Murray; 
Schrader, M.E., Young Dupr{\'e} revisited (1995) Langmuir, 11, p. 3585; 
Owens, D.K., Wendt, R.D., Estimation of the surface free energy of polymers (1969) J Appl Polym Sci, 13, pp. 1741-1769; 
Williams, R.L., Williams, D.F., Albumin adsorption on metal surfaces (1988) Biomaterials, 9, pp. 206-212; 
Lopes, M.A., Monteiro, F.J., Santos, J.D., Serro, A.P., Saramago, B., Hydrophobicity, surface tension, and zeta potential measurements of glass-reinforced hydroxyapatite composites (1999) J Biomed Mater Res, 45, pp. 370-375; 
Tripp, B.C., Magda, J.J., Andrade, J.D., Adsorption of globular proteins at the air/water interface as measured via dynamic surface tension: Concentration dependence, mass-transfer and adsorption kinetics (1995) J Coll Interface Sci, 173, pp. 16-27; 
Voigt, A., Thiel, O., Williams, D., Policova, Z., Zing, W., Neumann, A.W., Axisymmetric drop shape analysis (ADSA) applied to protein solutions (1991) Coll and Surf, 58, pp. 315-326; 
Suzuki, T., Nishizawa, K., Yokogawa, Y., Kameyama, T., Time-dependent variation of the surface structure of bioceramics in tissue culture medium and the effect of adhesiveness of cells (1996) J Ferment Bioeng, 81, pp. 226-232; 
Susuki, T., Yamamoto, T., Yoriyama, M., Kameyama, T., Surface instability of calcium phosphate ceramics in tissue culture medium and the effect on adhesion and growth of anchorage-dependent animal cells (1997) J Biomed Mater Res, 34, pp. 504-517; 
Haynes, C.A., Norde, W., Globular proteins at solid/liquid interfaces (1994) Coll and Surf B: Biointerfaces, 2, pp. 517-566; 
Kondori, K., Soito, M., Takebe, T., Yasukawa, A., Adsorption of bovine serum albumin on synthetic carbonate calcium hydroxyapatite (1995) J Coll Interface Sci, 184, pp. 124-129
},
	month = {2001///},
	pages = {3105 - 3112},
	abstract = {Multilayered plasma sprayed coatings on the surface of Ti-6Al-4V alloys have been prepared, which were composed of an underlayer of HA and a surface layer of a CaO-P                        2O
                        5 glass-HA composite, with 2 or 4 wt\% of glass. Contact angle and surface tension variation with time, for both water and a protein solution, were determined by the sessile and pendent drop methods respectively using the ADSA-P software. Wettability studies showed that hydrophobicity of the coatings increase with the glass addition. The work of adhesion of albumin was also altered in a controlled manner by the addition of the CaO-P
                        2O
                        5 glass, being lower on the composite coatings than on HA. Zeta potential (ZP) results showed that composite coatings presented a higher net negative charge than HA coatings and that ZP values were also influenced by the content of the glass. This study demonstrated that the surface properties of those coatings may be modified by the addition of CaO-P
                        2O
                        5 glass. {\textcopyright} 2001 Published by Elsevier Science Ltd.
},
	keywords = {Adhesion, alloy, analytic method, article, bovine serum albumin, Calcium Compounds, calcium oxide, chemical composition, Chemical modification, Coatings, Composition, computer program, Contact angle, Durapatite, glass, hydrophobicity, hydroxyapatite, Hydroxyapatite glass composites, oxide, Oxides, pentoxide, Phosphorus Compounds, priority journal, protein, Serum Albumin, Bovine, Sprayed coatings, Surface charge, Surface Properties, Surface tension, Surface tension zeta potential, time, unclassified drug, Water, wettability, Wetting, X-Ray Diffraction, Zeta potential},
	isbn = {01429612 (ISSN)},
	url = {http://www.scopus.com/inward/record.url?eid=2-s2.0-0034841180\&partnerID=40\&md5=552d64a5e7743f1d3c19fafc42a6e38d},
	author = {Ferraz, M.P. and Monteiro, F.J. and Serro, A.P. and Saramago, B. and Gibson, I.R. and Santos, J.D.}
}
@article {2575,
	title = {Hydrophobicity, surface tension, and zeta potential measurements of glass-reinforced hydroxyapatite composites},
	journal = {Journal of Biomedical Materials ResearchJ. Biomed. Mater. Res.},
	volume = {45},
	year = {1999},
	note = {Cited By (since 1996): 46Export Date: 21 November 2012Source: ScopusCODEN: JBMRBdoi: 10.1002/(SICI)1097-4636(19990615)45:4<370::AID-JBM12>3.0.CO;2-0PubMed ID: 10321710Language of Original Document: EnglishCorrespondence Address: Santos, J.D.; INEB, University of Porto, Rua do Campo Alegre, 823, 4150 Porto, PortugalChemicals/CAS: Biocompatible Materials; Calcium Phosphates; Hydroxyapatites; Proteins; VitronectinReferences: Yamamuro, Y., Hench, L.L., Wilson, J., (1990) CRC Handbook of Bioactive Ceramics, , Boca Raton, FL: CRC Press;Santos, J.D., Knowles, J.C., Reis, R.L., Monteiro, F.J., Hastings, G.W., Microstructural characterization of glass reinforced hydroxyapatite composites (1994) Biomaterials, 15, pp. 5-10; 
Aoki, H., Medical applications of hydroxyapatite (1991) Science and Medical Applications of Hydroxyapatite, pp. 1-214. , Aoki H, Sawai K, editors. Tokyo: Takyama Press System Center; 
Akao, M., Aoki, H., Kato, K., Mechanical properties of sintered hydroxyapatite for prosthetic applications (1981) J Mater Sci, 16, pp. 809-812; 
Davies, J.E., The importance and measurement of surface charge species in cell behaviour at the biomaterial interface (1988) Surface Characterization of Biomaterials, pp. 219-234. , Ratner BD. New York: Elsevier; 
Ratner, B.D., Biomaterial surfaces (1987) J Biomed Mater Res Appl Biomat, 21, pp. 59-90; 
Manson, S.R., Harker, L.A., Ratner, B.D., Hoffman, A.S., Evaluation of artificial surfaces with a non human primate model of arterial thrombosis (1980) J Lab Clin Med, 95, pp. 289-304; 
Grinnell, F., Milamand, M., Srere, P.A., Studies on cell adhesion (1972) Arch biochem biophys, 153, pp. 193-198; 
Chang, S.K., Hum, O.S., Moscarello, Ma., Neumann, A.W., Zing, W., Leutheusser, M.J., Ruegsegger, B., Platelet adhesion to solid surfaces: The effect of plasma proteins and substrate wettability (1997) Med Progr Technol, 5, pp. 57-66; 
Agathopoulos, S., Nikolopoulos, P., Determination of the energy of the interactions oxides and biological liquids (1995) Fourth Euro Ceramics, 8, pp. 319-324. , Ravaglioli A, editor; 
Lapin, M., Warocquier-Cl{\'e}rout, R., Legris, C., Degrange, M., Luizard, M.F.S., Correlation between roughness and wettability, cell adhesion and cell migration (1997) J Biomed Mater Res, 36, pp. 99-108; 
Williams, D.F., Bagnall, R.D., Adsorption of proteins on polymers and its role in the response of soft tissue (1998) Fundamental Aspects of Biocompatibility, 2, pp. 113-127. , Williams DF, editor. Boca Raton, FL: CRC Press; 
Dimitrov, S., Krachevsky, P.A., Nikolov, A.D., Noshi, H., Matsumoto, M., Contact angle measurements with sessile drops and bubbles (1991) J Colloid Interface Sci, 145, pp. 279-282; 
Adamson, W., (1990) Physical chemistry of surfaces. 5th edition, pp. 4-52. , New York: Wiley; 
Young, T., (1835) Miscellaneous Works, 1, p. 418. , Peacock G, editor London: Murray; 
Young, T., (1805) Philos Trans R Soc Lond, 95, p. 65; 
Correia, N.T., Ramos, J.M., Saramago, B., Calado, J., Estimation of the surface tension of a solid: Application to a liquid crystalline (1997) J Colloid Interface Sci, 189, pp. 361-369; 
Owens, D.K., Wendt, R.D., Estimation of the surface free energy of polymers (1969) J Appl Polym Sci, 13, p. 1741; 
Schrader, M.E., Young dupr{\'e} revisited (1995) Langmuir, 11, p. 3585; 
Kowalchuk, R.M., Pollack, S.R., Ducheyne, P., King, L.A., Particle microelectrophoresis of calcium-deficient hydroxyapatite: Solution composition and kinetics effects (1993) J Biomed Mater Res, 27, pp. 783-790; 
Ducheyne, P., Kim, C.S., Pollack, S.R., The effect of phase differences on the time dependent variation of the zeta potential of hydroxyapatite (1992) J Biomed Mater Res, 26, pp. 147-168; 
Suzuki, T., Nishizawa, K., Yokogawa, Y., Kameyama, T., Time-dependent variation of the surface structure of bioceramics in tissue culture medium and the effect on adhesiveness of cells (1996) J Ferment Bioeng, 81, pp. 226-232; 
Susuki, T., Yamamoto, T., Yoriyama, M., Kameyama, T., Surface instability of calcium phosphates ceramics in tissue culture medium and the effect on adhesion and growth of anchorage-dependent animal cells (1997) J Biomed Mater Res, 34, pp. 507-517; 
Hay, H., (1991) Cell Biology of Extracellular Matrix. 2nd Edition, pp. 127-129. , New York: Plenum Press; 
Seiffert, D., Detection of vitronectin in mineralized bone matrix (1986) J Histochem Cytochem, 44, pp. 275-280; 
Rodan, G.A., Introduction to bone biology (1992) Bone, 12, p. 53; 
Young, M.E., Kerr, J.M., Ibaraki, K., Heegaard, A.M., Gehron, R.P., Structure, expression and regulation of the major matrix proteins of bone (1992) Clin Orthop Rel Res, 281, p. 275; 
Formigli, L., Zecchi, S., Benvenuti, S., Brandi, M.L., Cell to cell interaction on bone tissue (1992) Ann NY Acad Sci, 673, p. 120; 
Underwound, P.A., Bennett, F.A., A comparison of the biological activities of the cell-adhesive proteins vitronectin and fibronectin (1989) J Cell Sci, 93, pp. 641-649; 
Hayman, E.G., Pierschbacher, M.D., Suzuki, S., Ruoslahti, E., Vitronectin: A major cell attachment-promoting protein in foetal bovine serum (1985) Exp Cell Res, 160, pp. 245-250; 
Lopes, Ma., Knowles, J.C., Santos, J.D., Monteiro, F.J., Olsen, I., Flow cytometry for assessing biocompatibility (1998) J Biomed Mater Res, 41, pp. 649-656; 
Lopes, Ma., Santos, J.D., Monteiro, F.J., Knowles, J.C., Glass reinforced hydroxyapatite: A comprehensive study of the effect of glass composition on the crystallography of the composite (1998) J Biomed Mater Res, 39, pp. 244-251; 
Cheng, P., Li, D., Boruvka, L., Rotenberg, Y., Neumann, A.W., Automation of axisymmetric drop shape analysis for measurements of interfacial tensions and contact angles (1990) Colloids Surf, 43, pp. 151-167; 
Cheng, P., Neumann, A.W., Computational evaluation of axisymmetric drop shape analysis-profile (ADSA-P) (1992) Colloids Surf, 62, pp. 297-306; 
Saramago, B., Teixeira, M.J., Rosa, M.E., Bordadao, J.C., Influence of the wetting properties of polymeric adhesives on the mechanical behaviour of cork agglomerates (1996) A Adhes Sci Technol, 10, pp. 1111-1127; 
Voigt, A., Thiel, O., Williams, D., Policova, Z., Zingg, W., Neumann, A.W., Asymmetric drop shape analysis (ADSA) applied to protein solution (1991) Colloid Surf, 58, p. 315; 
Williams, R.L., Hunt, J.A., Tengvall, P., Fibroblast adhesion onto methyl-silica gradients with and without preadsorbed proteins (1995) J Biomed Mater Res, 29, pp. 1545-1555; 
Hench, L.L., Ethridge, E.C., (1982) Biomaterials: An Interfacial Approach, , New York: Academic Press; 
Horbert, T.A., Brash, J.L., Proteins at interfaces. II. Fundamentals and applications (1994) ACS Symposium, 602, pp. 1-23. , Chapter 1, Chapter 7; 
Vogler, E.A., Interfacial chemistry in biomaterials science (1993) Wettability, 49, pp. 183-250. , Berg JC, editor New York: Marcel Dekker; Chapter 4
},
	month = {1999///},
	pages = {370 - 375},
	publisher = {John Wiley \& Sons Inc},
	abstract = {Wettability and zeta potential studies were performed to characterize the hydrophobicity, surface tension, and surface charge of P                        2O
                        5-glass- reinforced hydroxyapatite composites. Quantitative phase analysis was performed by the Rietveld method using GSAS software applied to X-ray diffractograms. Surface charge was assessed by zeta potential measurements. Protein adsorption studies were performed using vitronectin. Contact angles and surface tensions variation with time were determined by the sessile and pendent drop techniques, respectively, using ADSA-P software. The highest (- 18.1 mV) and lowest (-28.7 mV) values of zeta potential were found for hydroxyapatite (HA) and β-tricalcium phosphate (β-TCP), respectively, with composite materials presenting values in between. All studied bioceramic materials showed similar solid surface tension. For HA and β-TCP, solid surface tensions of 46.7 and 45.3 mJ/m
                        2, respectively, were obtained, while composites presented intermediate surface tension values. The dispersive component of surface tension was the predominant one for all materials studied. Adhesion work values between the vitronectin solution and HA and β- TCP were found to be 79.8 and 88.0 mJ/m
                        2, respectively, while the 4.0 wt \% glass composites showed slightly lower values than the 2.5 wt \% ones. The presence of β-TCP influenced surface charge, hydrophobicity, and protein adsorption of the glass-reinforced HA composites, and therefore indirectly affected cell-biomaterial interactions.
The hydrophobicity, surface tension, and surface charge of P
                        2O
                        5-glass-reinforced hydroxyapatite (HA) composites were characterized through wettability and zeta potential studies. The highest and lowest values of zeta potential were found for HA and β-TCP. All studied bioceramic materials showed similar solid surface tension. The presence of β-TCP indirectly affected cell-biomaterial interactions.
},
	keywords = {Adhesion, Adsorption, Algorithms, article, Biocompatible Materials, biomaterial, Biomaterials, Bone, Calcium Compounds, calcium phosphate, Calcium phosphates, Cells, Chemical analysis, Chemistry, Physical, Composite materials, Contact angle, glass, Glass reinforced hydroxyapatite composites, hydrophobicity, hydroxyapatite, Hydroxyapatite-glass composites, Hydroxyapatites, implant, Implants (surgical), Interfacial energy, Phosphorus Compounds, Protein adsorption, Proteins, Surface charge, Surface Properties, surface property, Surface tension, Tricalcium phosphate, Vitronectin, wettability, X-Ray Diffraction, Zeta potential},
	isbn = {00219304 (ISSN)},
	url = {http://www.scopus.com/inward/record.url?eid=2-s2.0-0033563979\&partnerID=40\&md5=3807a20c608ec3dcf8cce1d48213c1a3},
	author = {Lopes, M.A. and Monteiro, F.J. and Santos, J.D. and Serro, A.P. and Saramago, B.}
}
@article {2605,
	title = {Apatite deposition on titanium surfaces - The role of albumin adsorption},
	journal = {BiomaterialsBIOMATERIALS},
	volume = {18},
	year = {1997},
	note = {Cited By (since 1996): 72Export Date: 21 November 2012Source: ScopusCODEN: BIMADdoi: 10.1016/S0142-9612(97)00031-8PubMed ID: 9212191Language of Original Document: EnglishCorrespondence Address: Serro, A.P.; Centro de Quimica Estrutural, Complexo I, Instituto Superior Tecnico, Av. Rovisco Pais, 1096 Lisboa Codex, PortugalChemicals/CAS: alpha-tricalcium phosphate; Apatites; calcium phosphate, 10103-46-5; Calcium Phosphates; dicalcium phosphate anhydrous, 7757-93-9; Hanks Balanced Salt Solution; Isotonic Solutions; monocalcium phosphate; Serum Albumin, Bovine; tetracalcium phosphate; Titanium, 7440-32-6References: Sundgren, J.-E., Bodo, P., Lundstrom, I., Auger electron spectroscopic studies of the interface between human tissue and implants of titanium and stainless steel (1986) J. Colloid Interface Sci., 10, pp. 9-20;Hanawa, T., Ota, M., Characterization of surface film formed on titanium in electrolyte using XPS (1992) Appl. Surface Sci., 55, pp. 269-276; 
Sousa, S.R., Barbosa, M.A., Corrosion resistance of titanium cp in saline physiological solutions with calcium phosphate and proteins (1993) Clin. Mater., 14, pp. 287-294; 
Li, P., Ohtsuki, C., Kokubo, T., Nakanishi, K., Soga, N., De Groot, K., The role of hydrated silica, titania and alumina in inducing apatite on implants (1994) J. Biomed. Mater. Res., 28, pp. 7-15; 
Tanahashi, M., Yao, T., Kokubo, T., Apatite coating on organic polymers by a biomimetic process (1994) J. Am. Ceram. Soc., 77, pp. 2805-2808; 
Martin, R.I., Brown, P.W., Formation of hydroxy-apatite in serum (1994) J. Mater. Sci.: Mater. Med., 5, pp. 96-102; 
Malmsten, M., Ellipsometric studies of protein layers adsorbed at hydrophobia surfaces (1994) J. Colloid Interface Sci., 166, pp. 333-342; 
Oscarsson, S., Protein adsorption onto protein-covered silica-gels (1994) J. Colloid Interface Sci., 165, pp. 402-410; 
Baier, R.E., Meyer, J.R., Natella, R.R., Carter, J.M., Surface properties determine bioadhesive outcomes: Methods and results (1984) J. Biomed. Mater. Res., 18, pp. 337-355; 
Andrade, J.D., (1985) Surface and Interfacial Aspects of Biomedical Polymers, 2, pp. 1-80. , ed. J. D. Andrade. Plenum Press, New York; 
Van Der Vegt, W., Van Der Mei, H.C., Busscher, H.J., Interfacial free energies in protein solution droplets on FEP-Teflon by axisymmetric drop shape analysis by profile - IgG versus BSA (1993) J. Colloid Interface Sci., 156, pp. 129-136; 
Kipaldi, V.D., Lemons, J.E., Surface energy characterization of unalloyed titanium (1994) J. Biomed. Mater. Res., 28, pp. 1419-1425; 
Van Der Vegt, W., Van Der Mei, H.C., Busscher, H.J., A comparison of different approaches to calculate surface free energy of protein-coated substrata from measured contact angles of liquids (1994) Langmuir, 10, pp. 1314-1318; 
Cheng, P., Li, D., Boruvka, L., Rotenberg, Y., Neumann, A.W., Automation of axisymmetric drop shape analysis for measurements of interfacial tensions and contact angles (1990) Colloids Surfaces, 43, pp. 151-167; 
Cheng, P., Neumann, A.W., Computational evaluation of axisymmetric drop shape analysis - Profile (ADSA-P) (1992) Colloids Surfaces, 62, pp. 297-306; 
Barbosa, M.A., Electrochemical impedance studies on calcium phosphate-metal interfaces (1991) Bioceramics, 4, pp. 325-333. , ed. W. Bonfield, G. W. Hastings and K. E. Tanner. Butterworth-Heinemann, London; 
Str{\"o}m, G., Carlsson, G., Wettability of kraft pulps -Effect of surface composition and oxygen plasma treatment (1993) Contact Angle, Wettability and Adhesion, pp. 475-491. , ed. K. L. Mittal. VSP, Utrecht; 
Good, G.R., Contact angle, wetting, and adhesion: A critical review (1992) J. Adhesion Sci. Technol., 6, pp. 1269-1302; 
Gomes, C.M., Fernandes, A.C., Almeida, B.S., The surface tension of cork from contact angle measurements (1993) J. Colloid Interface Sci., 156, pp. 195-201; 
Van Oss, C.J., Good, R.J., Chaudhury, M.K., The role of van der Waals and hydrogen bonds in hydrophobic interactions between biopolymers and low energy surfaces (1986) J. Colloid Interface Sci., 111, pp. 378-390; 
Absolom, D.R., Van Oss, C.J.A., Neumann, A.W., Determination of surface tensions of proteins. II. Surface tension of serum albumin, altered at the protein-air interface (1981) Biochim. Biophys. Acta, 670, pp. 74-78; 
Paynter, R.W., Ratner, B., The study of interfacial proteins and biomolecules by X-ray photoelectron spectroscopy (1985) Surface and Interfacial Aspects of Biomedical Polymers, 2, pp. 189-216. , ed. J. D. Andrade. Plenum Press, New York; 
Raider, S.I., Flitsch, R., Palmer, M.J., Oxide growth on etched silicon in air at room temperature (1975) J. Electrochem. Soc.: Solid State Sci. Technol., 122, pp. 413-418
},
	month = {1997///},
	pages = {963 - 968},
	publisher = {Elsevier Science Ltd},
	abstract = {Titanium implant surfaces are known to spontaneously nucleate apatite layers when in contact with simulated body fluids. However, adsorption of proteins may influence the process of apatite layer formation. In this study the role of bovine serum albumin (BSA) adsorption in the process of apatite deposition on titanium substrates is investigated. Deposition of calcium phosphate was induced by immersing titanium substrates in a Hank{\textquoteright}s balanced salt solution (HBSS) for times ranging from 1 to 23 days. The resulting substrates were studied by scanning electron microscopy (SEM), energy dispersive spectroscopy (EDS), X-ray photoelectron spectroscopy (XPS), wettability measurements and electrochemical impedance determinations. All these methods indicate the presence of a calcium phosphate layer. The same procedure was repeated substituting HBSS with a solution of BSA in HBSS. Although SEM, EDS and electrochemical impedance spectra do not reveal the presence of an apatite layer, XPS analysis strongly indicates that the inhibition of apatite formation by BSA is only partial. The competition between BSA adsorption and apatite deposition seems to lead to a mixed film where the protein co-exists with calcium phosphate. Wettability studies suggest that this surface film is heterogeneous and porous, similar to the thicker films formed in albumin-free HBSS.Titanium implant surfaces are known to spontaneously nucleate apatite layers when in contact with simulated body fluids. However, adsorption of proteins may influence the process of apatite layer formation. In this study the role of bovine serum albumin (BSA) adsorption in the process of apatite deposition on titanium substrates is investigated. Deposition of calcium phosphate was induced by immersing titanium substrates in a Hank{\textquoteright}s balanced salt solution (HBSS) for times ranging from 1 to 23 days. The resulting substrates were studied by scanning electron microscopy (SEM), energy dispersive spectroscopy (EDS), X-ray photoelectron spectroscopy (XPS), wettability measurements and electrochemical impedance determinations. All these methods indicate the presence of a calcium phosphate layer. The same procedure was repeated substituting HBSS with a solution of BSA in HBSS. Although SEM, EDS and electrochemical impedance spectra do not reveal the presence of an apatite layer, XPS analysis strongly indicates that the inhibition of apatite formation by BSA is only partial. The competition between BSA adsorption and apatite deposition seems to lead to a mixed film where the protein co-exists with calcium phosphate. Wettability studies suggest that this surface film is heterogeneous and porous, similar to the thicker films formed in albumin-free HBSS.
},
	keywords = {Adsorption, Albumin, Albumin adsorption, Animals, Apatite, Apatite deposition, Apatites, article, Binding Sites, Bovinae, bovine serum albumin, Calcium Compounds, calcium phosphate, Calcium phosphates, Cattle, Deposition, Electric Impedance, Electrochemical impedance, Energy dispersive spectroscopy, impedance, implant, Isotonic Solutions, Microscopy, Electron, Scanning, priority journal, Prostheses and Implants, Proteins, Scanning electron microscopy, Serum Albumin, Bovine, Spectrometry, X-Ray Emission, Substrates, Surface Properties, surface property, Surfaces, Tissue Preservation, Titanium, wettability, X ray photoelectron spectroscopy},
	isbn = {01429612 (ISSN)},
	url = {http://www.scopus.com/inward/record.url?eid=2-s2.0-0031193883\&partnerID=40\&md5=b9eea9b29c987a3c928f576d0b9cdb67},
	author = {Serro, A.P. and Fernandes, A.C. and Saramago, B. and Lima, J. and Barbosa, M.A.}
}
