



@book {2488,
	title = {Biological Activity of Two Glass Ceramics in the Meta- and Pyrophosphate Region: A Comparative Study},
	series = {Key Engineering MaterialsKey Eng Mat},
	volume = {254-256},
	year = {2004},
	note = {Conference code: 62053Cited By (since 1996): 2Export Date: 21 November 2012Source: ScopusCODEN: KEMAELanguage of Original Document: EnglishCorrespondence Address: Dias, A.G.; Faculdade de Engenharia, Universidade do Porto, DEMM, Rua Dr. Roberta Frias, 4200 Porto, PortugalReferences: Dias, A.G., Lopes, M.A., Gibson, I., Santos, J.D., J. Non-Crystal. Solids, , in press;Dias, A.G., Lopes, M.A., Tsuru, K., Hayakawa, S., Santos, J.D., Osaka, A., Physiscs and Chemistry of Glasses, , in press; 
Dias, A.G., Lopes, M.A., Santos, J.D., Advance Materials Science, , in press; 
Rykke, M., Rolla, G., Sonju, T., (1988) Scand. J. Dent. Res., 96, pp. 517-522
},
	month = {2004///},
	pages = {825 - 828},
	address = {Porto},
	abstract = {Based upon the CaO-P                        2O
                        5 glass system, two glass ceramics were prepared in the metaand pyrophosphate regions. The present work describes preliminary results concerning the biological activity of MK5B (45CaO-45P
                        2O
                        5-5MgO-5K20, in mol \%) and MT13B (45CaO-37P
                        2O
                        55-5MgO-13TiO
                        2, in mol \%) using MG63 osteoblast-like cells. Both materials supported cell growth and proliferation which increased with the incubation time. However, cell growth was significantly lower on seeded MK5B samples. SEM observation showed that cell adhesion and spreading were hampered on this material. Evident degradation of the material surface was observed with simultaneous cell proliferation and material precipitation. By contrast, MT13B presented a relatively stable surface throughout the culture time. Results suggest that the in vitro biological behaviour of MK5B and MT13B is related with differences in the degradation rates of the two materials during the culture time.
},
	keywords = {Adhesion, Biodegradable glass ceramics, Biodegradation, Bone, cell proliferation, Cells, Crystallization, Degradation, Glass ceramics, incubation time, MG63 osteoblast-like cells, Scanning electron microscopy, X ray diffraction},
	isbn = {10139826 (ISSN)},
	url = {http://www.scopus.com/inward/record.url?eid=2-s2.0-0348146001\&partnerID=40\&md5=5245524d4dfb5615946aadcf5eb7c37a},
	author = {Dias, A.G. and Costa, M.A. and Lopes, M.A. and Santos, J.D. and Fernandas, M.H.},
	editor = {Barbosa M.A. and Monteiro F.J. and Correia R. and Leon B.}
}
@book {2486,
	title = {CaO-P                    2O
                    5 Glass-Hydroxyapatite Thin Films Obtained by Laser Ablation: Characterisation and In Vitro Bioactivity Evaluation
},
	series = {Key Engineering MaterialsKey Eng Mat},
	volume = {254-256},
	year = {2004},
	note = {Conference code: 62053Cited By (since 1996): 1Export Date: 21 November 2012Source: ScopusCODEN: KEMAELanguage of Original Document: EnglishCorrespondence Address: Ferraz, M.P.; Inst. de Engenharia Biom{\'e}dica, Laborat{\'o}rio de Biomateriais, Rua Campo Alegre 823, 4150-180 Porto, Portugal; email: mpferraz@ufp.ptReferences: Arias, J.L., (1997) J Mater. Sci. Mater. Med., 8, pp. 873-876;Peraire, C., (1997) 13 th European Conference on Biomaterials, p. 75. , G{\"o}teborg, Sweden, 4-7 Sept; 
Ferraz, M.P., Monteiro, F.J., Santos, J.D., (1999) J Biomed Mater Res, 45, p. 373; 
Ferraz, M.P., Fernandes, M.H., Trigo-Cabral, A., Santos, J.D., Monteiro, F.J., (1999) J. Mat Sci: Mat. Med, 10 (9), p. 567
},
	month = {2004///},
	pages = {347 - 350},
	address = {Porto},
	abstract = {Hydroxyapatite (HA) coatings have been applied to improve adhesion of non-cemented implants to host bone. Plasma spraying is the most common technique leading to thick calcium phosphate films (\&gt;120μm). Pulse laser deposition (PLD), is a possible alternative method to obtain thin (\&lt;10 μm), well adherent hydroxyapatite (HA) films. Similarly to synthetic HA, biological apatites contain Ca                        2+, PO
                        4
                        3- and OH
},
	keywords = {2O, 5 glass, Adhesion, Bioactivity, Bone, Calcium Compounds, CaO-P, Coatings, Deposition, Energy dispersive spectroscopy, Homogeneous mixtures, Hydroxylapatite thin films, Implants (surgical), In vitro bioactivity, Laser ablation, Plasma spraying, Scanning electron microscopy, Thin films, X ray diffraction},
	isbn = {10139826 (ISSN)},
	url = {http://www.scopus.com/inward/record.url?eid=2-s2.0-0347516195\&partnerID=40\&md5=ddd47b73956669a35aa9041ce9102612},
	author = {Ferraz, M.P. and Monteiro, F.J. and Gi{\~a}o, D. and Leon, B. and Gonzalez, P. and Liste, S. and Serra, J. and Arias, J. and Perez-Amor, M.},
	editor = {Barbosa M.A. and Monteiro F.J. and Correia R. and Leon B.}
}
@book {2494,
	title = {Combining Foaming and Starch Consolidation Methods to Develop Macroporous Hydroxyapatite Implants},
	series = {Key Engineering MaterialsKey Eng Mat},
	volume = {254-256},
	year = {2004},
	note = {Conference code: 62053Cited By (since 1996): 10Export Date: 21 November 2012Source: ScopusCODEN: KEMAELanguage of Original Document: EnglishCorrespondence Address: Lemos, A.F.; Depto. de Engenharia Cer{\^a}mica, CICEO, Campus de Santiago, 3810-193 Aveiro, Portugal; email: ilemos@cv.ua.ptReferences: De Groot, K., (1983) Bioceramics of Calcium Phosphates, , CRC Press, Boca Raton, FL;Hench, L.L., Wilson, J., (1993) An Introduction to Bioceramics, , World Scientific, London, UK; 
Ohgushi, H., Okumura, M., Yoshikawa, T., Inoue, K., Senpuku, N., Tamai, S., Shors, E.C., (1992) J. Biomed. Mater. Res., 26, p. 885; 
Minnear, W.P., (1992) Processing of Foamed Ceramics, Ceramic Transactions, Forming Science and Technology for Ceramics Vol. 26, 26. , ed. M.J. Cima, The American Ceramic Society, USA; 
Omatete, O., Janney, M.A., Strehlow, R.A., (1991) Am. Ceram Soc.Bull., 70, p. 1641; 
Kosmac, T., Novak, S., Sajko, M., (1995) Fourth Euro Ceramics, Vol. 1, Basic Science Developments, 1. , ed. C. Galassi. Gruppo Editoriale Faenza Editrice S.p.a., Italy; 
Graule, T.J., Baader, F.H., Gauckler, L.J., (1994) Cfi/Ber. DKH., 71, p. 317; 
Novich, B.E., Sundback, C.A., Adams, R.W., (1992) Ceramic Transactions, 26. , ed. M. J. Cima. American Ceramic Society, USA; 
Rives, R.D., U. S. Patent 4113480 (1976)Lycfeldt, O., Brandt, J., Lesca, S., (2000) J. Eur. Ceram. Soc., 20 (14-15), p. 2551; 
Olhero, S.M., Tar{\`\i}, G., Coimbra, M.A., Ferreira, J.M.F., (2000) J. Eur. Ceram. Soc., 20 (4), p. 423; 
Lycfeldt, O., Ferreira, J.M.F., (1998) J. Eur. Ceram. Soc., 18, p. 131; 
Lemos, A.F., Santos, J.D., Ferreira, J.M.F., (2003) Advanced Materials Forum, , in press
},
	month = {2004///},
	pages = {1041 - 1044},
	address = {Porto},
	abstract = {Hydroxyapatite (HA) is the calcium-phosphate material with composition closest to that of bone, what makes it suitable for osseous implant purposes. This material was used to produce macroporous structures with pores larger than 100 μm, which are believed to be suitable for allowing bone ingrowth. The macroporous structures were generated and consolidated by combining foaming and starch consolidation methods. The porous structures could be tailored according to the final application by varying the proportion of different foaming agents, foam-bath concentrate (FBC) and sodium lauril sulphate (SLS). Playing with these proportions it was also possible to improve foam stability and model the size of pores and pore interconnections in order to reproduce the pore structure of natural bone.},
	keywords = {Bioceramics, Biocompatibility, Bone, Composition, Foaming method, hydroxyapatite, Hydroxyapatlte, Implants (surgical), Macroporous structures, Microstructure, Pore size, Porous ceramics, Porous materials, Starch, Starch consolidation},
	isbn = {10139826 (ISSN)},
	url = {http://www.scopus.com/inward/record.url?eid=2-s2.0-0346885485\&partnerID=40\&md5=63e5b33a0a2185af44b629c565e5240f},
	author = {Lemos, A.F. and Ferreira, J.M.F.},
	editor = {Barbosa M.A. and Monteiro F.J. and Correia R. and Leon B.}
}
@book {2495,
	title = {Designing of Bioceramics with Bonelike Structures Tailored for Different Orthopaedic Applications},
	series = {Key Engineering MaterialsKey Eng Mat},
	volume = {254-256},
	year = {2004},
	note = {Conference code: 62053Cited By (since 1996): 4Export Date: 21 November 2012Source: ScopusCODEN: KEMAELanguage of Original Document: EnglishCorrespondence Address: Lemos, A.F.; Depto. de Engenharia Cer{\^a}mica, CICECO, Campus de Santiago, 3810-193 Aveiro, Portugal; email: ilemos@cv.ua.ptReferences: Hing, K.A., Best, S.M., Tanner, K.E., Bondfield, W., Revell, P.A., (1997) J. Mater. Sci: Mater Med., 8, p. 731;Santos, J.D., Knowles, J.C., Reis, R.L., Monteiro, F.J., Hastings, G.W., (1994) Biomaterials, 15, p. 5; 
Lopes, M.A., Knowles, J.C., Santos, J.D., Monteiro, F.J., Olsen, I., (1998) J. Biomed. Mater. Res., 41, p. 649; 
Kon, E., Muraglia, A., Corsi, A., Bianco, P., Marcacci, M., Martin, I., Boyde, A., Quarto, R., (2000) J. Biomed. Mater. Res., 49 (3), p. 328; 
Prado da Silva, M.H., Lemos, A.F., Lopes, M.A., Ferreira, J.M.F., Santos, J.D., (2002) Journal of Non-crystalline Solids, 304, p. 286; 
Schwartzwalder, K., Somers, A.V., U.S. Patent n{\textdegree} 3 090 094, (1963)Saggio-Woyanski, J., Scott, C.E., Minnear, W.P., (1992) Amer. Ceram. Soc. Bull., 71 (11), p. 1674; 
Olhero, S.M., Tar{\`\i}, G., Coimbra, M.A., Ferreira, J.M.F., (2000) J. Eur. Ceram. Soc., 20 (4), p. 423; 
Lyckfeldt, O., Ferreira, J.M.F., (1998) J. Eur. Ceram. Soc., 18, p. 131; 
Lemos, A.F., Santos, J.D., Ferreira, J.M.F., (2003) Advanced Materials Forum, , in press; 
Lyckfeldt, O., Brandt, J., Lesca, S., (2000) J. Eur. Ceram. Soc., 20 (14-15), p. 2551
},
	month = {2004///},
	pages = {1037 - 1040},
	address = {Porto},
	abstract = {Innovative methods for the production of porous bioceramics for implants with tailored pore volume fractions, pore sizes, pore size distributions and pore interconnectivity have been developed. The average pore sizes can vary from a few micrometers to more than one millimeter, therefore fulfilling all the needs required for components used in implantology. The methods combine in a suitable way the knowledge coming from different areas in the field of colloid and interface science, namely, on the processing of ceramic materials by traditional colloidal shaping techniques such as slip casting with a number of new direct consolidation techniques, which transform the fluid hydroxyapatite (HA) based suspensions into rigid bodies, and particularly the expertise in the production of porous ceramics by different techniques. Slip casting was preferably used for designing the cortical part of the bone, while direct consolidation techniques were used to "freeze" tailored foamy structures or suspensions containing different kinds of organic inclusions of suitable sizes and amounts that generate pores after burning out.},
	keywords = {Bioceramics, Biocompatibility, Bone, Cells, Ceramic materials, Consolidation techniques, hydroxyapatite, morphology, orthopedics, Pore size, Porous ceramics, Porous materials, Sintering, Slip casting},
	isbn = {10139826 (ISSN)},
	url = {http://www.scopus.com/inward/record.url?eid=2-s2.0-0347516107\&partnerID=40\&md5=1bc01982f338c175b41fd08698d3da1c},
	author = {Lemos, A.F. and Ferreira, J.M.F.},
	editor = {Barbosa M.A. and Monteiro F.J. and Correia R. and Leon B.}
}
@book {2493,
	title = {Effect of the Solvents on the Solution Mixture Derived Polylactide/hydroxyapatite Composites},
	series = {Key Engineering MaterialsKey Eng Mat},
	volume = {254-256},
	year = {2004},
	note = {Conference code: 62053Cited By (since 1996): 1Export Date: 21 November 2012Source: ScopusCODEN: KEMAELanguage of Original Document: EnglishCorrespondence Address: Weng, W.; Dept. of Mat. Sci. and Engineering, Zhejiang University, Hangzhou 310027, China; email: wengwj@zju.edu.cnReferences: Hench, L.L., (1998) Journal of American Ceramic Society, 81, p. 1705;Wang, M., (2003) Biomaterials, 24, p. 2133; 
Hao, J., Yuan, M., Deng, X., (2001) Biomaterials, 22, p. 2867; 
Ignjatovic, N., Tomic, S., Dakic, M., Miljkovic, M., Plavsic, M., Uskokovic, D., (1999) Biomaterials, 20, p. 809; 
Misra, D.N., (1988) Langmuir, 4, p. 953; 
Dean, J.A., (1999) Lange{\textquoteright}s Handbook of Chemistry (15th Edition), , McGraw-HILL, INC. New York
},
	month = {2004///},
	pages = {477 - 480},
	address = {Porto},
	abstract = {Polylactide/hydroxyapatite composites were prepared by a solution mixture method. Chloroform and tetrahydrofuran were used as solvents. The effect of the solvents on the polylactide/hydroxyapatite composites was investigated by TEM, mechanical properties, sedimentation time and UV-Vis transmission spectra. The results indicate that the polylactide/hydroxyapatite prepared using tetrahydrofuran as solvent has better dispersion of the hydroxyapatite filler in the matrix and larger bend strength than the one using chloroform as solvent. This is ascribed to the proper interaction between the solvent and hydroxyapatite filler.},
	keywords = {Bend strength, Composite, Composite materials, dispersion, Dispersions, Fillers, Heat treatment, Hydroxvapatite, hydroxyapatite, Polarity, polylactide, Sedimentation, Solutions, Solvent, Solvents, transmission electron microscopy, Ultraviolet radiation},
	isbn = {10139826 (ISSN)},
	url = {http://www.scopus.com/inward/record.url?eid=2-s2.0-0346885571\&partnerID=40\&md5=4f0c563b563f23ea5102e4ef36cfd243},
	author = {Li, Y. and Weng, W. and Cheng, K. and Du, P. and Shen, G. and Han, G. and Lopes, M.A. and Santos, J.D.},
	editor = {Barbosa M.A. and Monteiro F.J. and Correia R. and Leon B.}
}
@book {2485,
	title = {Effects of some variables on R.F. Magnetron Sputtered Hydroxyapatite Coatings on Titanium},
	series = {Key Engineering MaterialsKey Eng Mat},
	volume = {254-256},
	year = {2004},
	note = {Conference code: 62053Export Date: 21 November 2012Source: ScopusCODEN: KEMAELanguage of Original Document: EnglishCorrespondence Address: Silva, R.A.; Inst. Sup. de Engenharia do Porto, Rua Dr. Antonio Bernardino A., 431, 4200-072 Porto, Portugal; email: ras@isep.ipp.ptReferences: Hing, K.A., Best, S.M., Tanner, K.E., Bonfield, W., Revell, P.A., (1997) Journal of Materials Science: Materials in Medicine, 8, pp. 731-736;Raynaud, S., Champion, E., Bernache-Assolant, D., Tetard, D., (1998) Journal of Materials Science: Materials in Medicine, 9, pp. 221-227; 
Weng, J., Liu, X., Zhang, X., De Groot, K., (1996) Journal of Biomedical Materials Research, 30, pp. 5-11; 
Gross, K.A., Gross, V., Berndt, C.C., (1998) Journal of the American Ceramic Society, 81 (1), pp. 106-112; 
Edwards, J.T., Brunski, J.B., Higuchi, (1997) Journal of Biomedical Materials Research, 36, pp. 454-468; 
Yang, C.Y., Lin, R.M., Wang, B.C., Lee, T.M., Chang, E., Hang, Y.S., Chen, P.Q., (1997) Journal of Biomedical Materials Research, 37, pp. 335-345; 
Ogiso, M., Yamamura, M., Kuo, P.T., Borgese, D., Matsumoto, T., (1998) Journal of Biomedical Materials Research, 39, pp. 364-372; 
Van Dijk, K., Schaeken, H.G., Wolke, J.G.C., Maree, C.H.M., Habraken, F.H.P.M., Jansen, J.A., (1995) Materials in Clinical Applications, pp. 249-256. , P. Vincenzini, (ed.); 
Yoshinari, M., Hayakawa, T., Wolke, J.G.C., Nemoto, K., Jansen, J.A., (1997) Journal of Biomedical Materials Research, 37, pp. 60-67; 
Wolke, J.G.C., De Groot, K., Jansen, J.A., (1998) Journal of Biomedical Materials Research, 39, pp. 524-530
},
	month = {2004///},
	pages = {323 - 326},
	address = {Porto},
	abstract = {RF sputtering may be used to produce thin, well adherent bioactive coatings with long term stability to ensure contact with bone tissue. RF Sputtered Hydroxyapatite (HA) coatings were produced onto Ti at 200 and 150 W. S.E.M. analysis indicated that films obtained with 200 W were thicker than those with 150 W. Significant variations were observed, depending on the location of the substrates with respect to the sample holder in the sputtering chamber, with thickness ranging from 1.8 to 3.2 μm. EDS analysis of 200 W films revealed the presence of Ca and P, in ratios typical of HA. XPS of thinner films obtained at 150 W, showed Ca and P, but also some carbonate probably partially substituting OH. Anodic polarisation curves of samples coated at 200 W and 150 W and for different sputtering times, compared to Ti substrate, indicate that HA films were protective and that the degree of protection increased with film thickness, i.e., with power intensity and time of deposition.},
	keywords = {Bioactive coatings, Bone, Coatings, Corrosion protection, hydroxyapatite, Magnetron sputtering, Plasma spraying, Polarization, RF sputtering, Scanning electron microscopy, Sputter deposition, Sputtering chambers, Thin films, Titanium},
	isbn = {10139826 (ISSN)},
	url = {http://www.scopus.com/inward/record.url?eid=2-s2.0-0347659048\&partnerID=40\&md5=3b3caf6fcde1c71242d25a74b296f870},
	author = {Silva, R.A. and Sousa, M. and Monteiro, F.J. and Barral, R. and Santos, J.D. and Lopes, M.A.},
	editor = {Barbosa M.A. and Monteiro F.J. and Correia R. and Leon B.}
}
@book {2489,
	title = {In Vitro Cytocompatibility of Osteoblastic Cells Cultured on Chitosan-Organosiloxane Hybrid Membrane},
	series = {Key Engineering MaterialsKey Eng Mat},
	volume = {254-256},
	year = {2004},
	note = {Conference code: 62053Cited By (since 1996): 2Export Date: 21 November 2012Source: ScopusCODEN: KEMAELanguage of Original Document: EnglishCorrespondence Address: Shirosaki, Y.; Biomaterial Laboratory, Faculty of Engineering, Okayama University, Tsushima, Okayama-shi 700-8530, JapanReferences: Chandy, T., Sharma, P.C., (1990) Biomat Art Cells Art Org, 18, pp. 1-24;Jameela, S.R., Jayakrishnan, A., (1995) Biomaterials, 16, pp. 769-775; 
Nishi, C., Nakajima, N., Ikada, Y., (1995) J Biomed Mater Res., 29, pp. 829-834; 
Ren, L., Tsuru, K., Hayajkawa, S., Osaka, A., (2002) Biomaterials, 23, pp. 4765-4773
},
	month = {2004///},
	pages = {857 - 860},
	address = {Porto},
	abstract = {Chitosan-silicate hybrids were synthesized using γ-glycidoxypropyltrimethoxysilane (GPSM) as the agent to cross-link the chitosan chains. Fourier-transform infrared (PT-IR) spectroscopy was used to analyze the structures of the hybrids. The swelling ability and the cytocompatibility of the hybrids were investigated as a function of the GPSM concentration. The swelling of the hybrids was suppressed by addition of GPSM. MG63 human osteoblastic cells were cultured on the hybrids. The adhesion and proliferation of the MG63 cells cultured on the chitosan-GPSM hybrid surface were improved comparing to that on chitosan membrane, regardless the GPSM concentration.},
	keywords = {Biocompatibility, Biological membranes, biosynthesis, Cell culture, Cells, chitosan, Chitosan-inorganic hybrid, Crosslinking, Cytocompatibility, Fourier transform infrared spectroscopy, Nuclear magnetic resonance spectroscopy, Organic polymers, Osteoblastic cell (MG63), Structural analysis, Synthetic polymers, Tissue, Tissue engineering, γ-Glycidoxypropyltrimethoxysilane (GPSM)},
	isbn = {10139826 (ISSN)},
	url = {http://www.scopus.com/inward/record.url?eid=2-s2.0-0346885502\&partnerID=40\&md5=80d45c86bb14c57c3b1a6b94b435e45d},
	author = {Shirosaki, Y. and Tsuru, K. and Hayakawa, S. and Osaka, A. and Lopes, M.A. and Santos, J.D. and Fernandes, M.H.},
	editor = {Barbosa M.A. and Monteiro F.J. and Correia R. and Leon B.}
}
@book {2499,
	title = {In Vitro Mineralisation of Human Bone Marrow Cells Cultured on Bonelike{\textregistered}},
	series = {Key Engineering MaterialsKey Eng Mat},
	volume = {254-256},
	year = {2004},
	note = {Conference code: 62053Cited By (since 1996): 6Export Date: 21 November 2012Source: ScopusCODEN: KEMAELanguage of Original Document: EnglishCorrespondence Address: Costa, M.A.; Inst. Cie. Blomed. de Abel Salazar, Universidade do Porto, Largo Abel Salazar, 4000 Porto, PortugalReferences: Santos, J.D., Campbell, J.K., Winston, G.H., European Patent N{\textdegree} WO0068164, 2000Lopes, M.A., Knowles, J.C., Santos, J.D., (2000) Biomaterials, 21, p. 1905;Lopes, M.A., Monteiro, F.J., Santos, J.D., (1999) J. Biomed. Mater. Res.:App. Biomater., 48, p. 734; 
Lopes, M.A., Knowles, J.C., Kuru, L., Santos, J.D., Monteiro, F.J., Olsen, I., (1998) J. Biomed. Mater. Res., 41, p. 649; 
Lopes, M.A., Knowles, J.C., Santos, J.D., Monteiro, F.J., Olsen, I., (2000) Biomaterials, 21, p. 1165; 
Ferraz, M.P., Fernandes, M., Santos, J.D., Monteiro, F.J., (2001) J. Mat. Sci.: Mat. Med., 12, p. 629; 
Lopes, M.A., Santos, J.D., Monteiro, F.J., Ohtsuki, C., Osaka, A., Kaneko, S., Inoue, H., (2001) J. Biomed. Mater. Res., 54, p. 463; 
Duarte, F., Santos, J.D., Afonso, A., Advanced Materials Forum, , in press; 
Coelho, M.J., Fernandes, M.H., (2000) Biomaterials, 21, p. 1095; 
Kleerekoper, M., (1996) Principles of Bone Biology, p. 1053. , Academic Press
},
	month = {2004///},
	pages = {821 - 824},
	address = {Porto},
	abstract = {Bonelike{\textregistered} is a CaO-P                        2O
                        5 based glass-reinforced hydroxyapatite (HA) designed to mimic the inorganic composition of the bone tissue. This work evaluates the response of human bone marrow cells to Bonelike{\textregistered} concerning cell proliferation and osteoblast differentiation. HA was used as control material. Results showed that Bonelike{\textregistered} allowed the proliferation of bone marrow cells and their complete differentiation, as evidenced by the formation of cell-mediated mineralisation. In comparison with HA, Bonelike{\textregistered} had a positive effect on the expression of alkaline phosphatase and also on the formation of a mineralised matrix, two osteoblast markers.
},
	keywords = {Bone, Bonelike{\textregistered}, Cell culture, cell proliferation, Composition, Grafts, Human bone marrow cells, hydroxyapatite, In vitro mineralisation, mineralization, Scanning electron microscopy, Sintering, X ray diffraction},
	isbn = {10139826 (ISSN)},
	url = {http://www.scopus.com/inward/record.url?eid=2-s2.0-0346255201\&partnerID=40\&md5=470ac94fd75d1a53b887d44f59fbf7d1},
	author = {Costa, M.A. and Gutierres, M. and Almeida, L. and Lopes, M.A. and Santos, J.D. and Fernandes, M.H.},
	editor = {Barbosa M.A. and Monteiro F.J. and Correia R. and Leon B.}
}
@book {2487,
	title = {In Vivo Behaviour of Bonelike{\textregistered}/PLGA Hybrid: Histological Analysis and Peripheral Quantitative Computed Tomography (pQ-CT) Evaluation},
	series = {Key Engineering MaterialsKey Eng Mat},
	volume = {254-256},
	year = {2004},
	note = {Conference code: 62053Cited By (since 1996): 1Export Date: 21 November 2012Source: ScopusCODEN: KEMAELanguage of Original Document: EnglishCorrespondence Address: Oliveira, J.M.; Inst. de Engenharia Biom{\'e}dica, Lab. de Biomaterials, Rua do Campo Alegre, 823, 4150-180 Porto, Portugal; email: jmoliv@fe.up.ptReferences: Solheim, E., Pinholt, E., Bang, G., (1992) Journal Neurosurgery, 76, pp. 275-279;Laurecin, C.T., Attawia, M.A., Lu, L.Q., Borden, M.D., Lu, H.H., Gorum, W.J., Lieberman, J.R., (2001) Biomaterials, 22, pp. 1271-1277; 
Nielsen, F.F., Karring, T., Gogolewski, S., (1992) Acta Orthop Scandinavica, 63, pp. 66-69; 
Jiang, G., Woo, B.H., Kang, F., Singh, J., Deluca, P.P., (2002) Journal of Controlled Release, 79, pp. 137-145; 
Duarte, F., Lopes, M.A., Santos, J.D., European Cells and Materials, , in press; 
Duarte, F., Afonso, A., Santos, J.D., Advanced Materials Forum, , in press; 
Oliveira, J.M., Lopes, M.A., Kawai, T., Ohtsuki, C., Santos, J.D., Afonso, A., Advanced Materials Forum, , in press; 
Santos, J.D., Campbell, J.K., Winton, G.H., European Patent N{\textdegree} W00068164 (2000)Oliveira, J.M., Miyazaki, T., Lopes, M.A., Ohtsuki, C., Santos, J.D., Biomaterials, , submitted
},
	month = {2004///},
	pages = {565 - 568},
	address = {Porto},
	abstract = {The present work consisted in assessing the in vivo biological behaviour of novel Bonelike{\textregistered}/PLGA hybrid materials through subcutaneous and tibiae implantations for a 4 week period using an animal model. No sign of inflammation was observed as a result of subcutaneous implantation, which reveals that these materials were well-tolerated by the soft tissues. pQ-CT analysis demonstrated that the implanted materials were highly osteointegrated in bone tissue. SEM analysis at bone defect area revealed that Bonelike{\textregistered} resorption occurred after 4 weeks of implantation. Although the osteoconductive properties of Bonelike{\textregistered} have been reported in literature, the present work allowed to demonstrate that the silane-coupling agent and the PLGA treatments do not significantly modify the biological performance of Bonelike{\textregistered}. This result is strongly encouraging since Bonelike{\textregistered}/PLGA hybrid materials are being developed for bone tissue healing/regeneration purposes with simultaneous delivery of therapeuthic molecules.},
	keywords = {Biodegradation, Bonelike{\textregistered}, Computerized tomography, Histological analysis, histology, hydroxyapatite, In vivo studies, Organic polymers, PLGA, pQ-CT, Silanes, Sintering, Synthetic polymers, Tibiae implantations, Tissue},
	isbn = {10139826 (ISSN)},
	url = {http://www.scopus.com/inward/record.url?eid=2-s2.0-0346255223\&partnerID=40\&md5=1d0c1ad508daa6b14d2d3aeabf5fff65},
	author = {Oliveira, J.M. and Kawai, T. and Lopes, M.A. and Ohtsuki, C. and Santos, J.D. and Afonso, A.},
	editor = {Barbosa M.A. and Monteiro F.J. and Correia R. and Leon B.}
}
@book {2491,
	title = {Mineralised membranes for bone regeneration},
	series = {Key Engineering MaterialsKey Eng Mat},
	volume = {254-256},
	year = {2004},
	note = {Conference code: 62053Cited By (since 1996): 1Export Date: 21 November 2012Source: ScopusCODEN: KEMAELanguage of Original Document: EnglishCorrespondence Address: Mesquita, P.; Inst. de Engenharia Biom{\'e}dica, R. do Campo Alegre 823, 4150-180 Porto, PortugalReferences: Baron, M., Haas, R., D{\"o}rtbudak, O., Watzek, G., Experimentally induced peri-implantitis: A review (2000) Int J Oral Maxillofac Implants, 15, pp. 533-544;Hammerle, C.H., Jung, R.E., Feloutzis, A., A systematic review of the survival of implants in bone sites augmented with barrier membranes (guided bone regeneration) in partially edentulous patients (2002) J Clin. Periodontol., 29 (SUPPL. 3), pp. 226-231; 
Brunel, G., Brocard, D., Duffort, J.F., Jacquet, E., Justumus, P., Simonet, T., Benque, E., Bioabsorbable materials for guided bone regeneration prior to implant placement and 7-year followup: Report of 14 cases (2001) J Periodontol., 72 (2), pp. 257-264; 
Karapati, S., Hugson, A., Kugelberg, C.F., Healing following GTR treatment of bone defects distal to mandibular 2 nd molars after removal of impacted 3 rd molars (2000) J. Clin. Periodontol., 27, pp. 325-332; 
Sim{\~o}es, R., Fonseca, L., Vasconcelos, M., Afonso, A., Cavalheiro, J., Modified exoskeleton of shrimp for guided bone regeneration (2002) 17 th ESB, , Barcelona, Spain, September
},
	month = {2004///},
	pages = {1091 - 1094},
	address = {Porto},
	abstract = {Guided bone regeneration can be achieved using filling biomaterials and protective membranes. The aim of this work is to study a new membrane prepared from shrimp shells, without modification of the natural concave shape. The "in vitro" bioactivity was evaluated using a simulated body fluid prepared with substitution of calcium by strontium (SBR-Sr). The bioactivity behaviour was increased using a surface treatment with sodium silicate. The "in vitro" and "in vivo" tests allow to conclude that these membranes are bioactive and can induce bone growth on their surfaces.},
	keywords = {Biological membranes, biomaterial, Biomaterials, Bone, Bone Regeneration, Calcium, Ceramic materials, Deproteinization, Membrane, Mineralised membranes, Natural material, Optical microscopy, Shear strength, Sodium compounds, Strontium, Substitution reactions},
	isbn = {10139826 (ISSN)},
	url = {http://www.scopus.com/inward/record.url?eid=2-s2.0-0348145956\&partnerID=40\&md5=51d6fa431f03c745e2def45321a0dfa0},
	author = {Mesquita, P. and Branco, R. and Afonso, A. and Vasconcelos, M. and Cavalheiro, J.},
	editor = {Barbosa M.A. and Monteiro F.J. and Correia R. and Leon B.}
}
@book {2492,
	title = {New Method for the Incorporation of Soluble Bioactive Glasses to Reinforce Porous HA Structures},
	series = {Key Engineering MaterialsKey Eng Mat},
	volume = {254-256},
	year = {2004},
	note = {Conference code: 62053Cited By (since 1996): 3Export Date: 21 November 2012Source: ScopusCODEN: KEMAELanguage of Original Document: EnglishCorrespondence Address: Lemos, A.F.; Dept. of Ceramic Engineering, University of Aveiro, Campus de Santiago, 3810-193 Aveiro, Portugal; email: ilemos@cv.ua.ptReferences: De Groot, K., (1983) Bioceramics of Calcium Phosphates, , CRC Press, Boca Raton, FL;Wilson, L.L., Hench, J., (1993) An Introduction to Bioceramics, , World Scientific, UK; 
Hench, L.L., (1998) J. Am. Ceram. Soc., 81, p. 1075; 
Kohri, M., Miki, K., Waite, D.E., Nakajima, H., Okabe, T., (1993) Biomaterials, 14, p. 299; 
Krivak, N., Tas, A.C., (1998) J. Am. Ceram. Soc., 81, p. 2245; 
Santos, J.D., Knowles, J.C., Reis, R.L., Monteiro, F.J., Hastings, G.W., (1994) Biomaterials, 15, p. 5; 
Lopes, M.A., Knowles, J.C., Santos, J.D., Monteiro, F.J., Olsen, I., (1998) J. Biomed. Mater. Res., 41, p. 649; 
Lemos, A.F., Santos, J.D., Ferreira, J.M.F., (2003) Advanced Materials Forum
},
	month = {2004///},
	pages = {1033 - 1036},
	address = {Porto},
	abstract = {The most widely used calcium-phosphate ceramic in clinical applications is hydroxyapatite, Ca                        10(PO
                        4)
                        6(OH)
                        2, however its dissolution rate in the human body after implantation is too low to achieve good results and it has poor mechanical properties. Recently, glass reinforced hydroxyapatite composites (GR-HA) have been developed, in order to improve the mechanical properties and to increase the similarity between implants and bone. The addition of a P
                        2O
                        5 based glass to a hydroxyapatite matrix, promotes the liquid phase sintering, improving the mechanical properties of the final bodies, and enabling the formation of two other calcium-phosphate phases, which have a higher dissolution rate, more compatible with bone regeneration. However, some of these glass compositions are soluble in water, making their incorporation in aqueous slurry impossible. Therefore, the aim of the present work is to study a new alternative method for the incorporation of soluble P
                        2O
                        5 based glass into macroporous structures obtained by different methods.
},
	keywords = {Bioactivation, Bioactive glass, Biocompatibility, Bone, Dissolution, glass, hydroxyapatite, Liquid phase sintering, Macroporous structures, Microstructure, Porous materials, Reinforced hydroxyapatite, Sintering, Slurries},
	isbn = {10139826 (ISSN)},
	url = {http://www.scopus.com/inward/record.url?eid=2-s2.0-0348145989\&partnerID=40\&md5=18598c198e7e03dbf785151b7033c392},
	author = {Lemos, A.F. and Santos, J.D. and Ferreira, J.M.F.},
	editor = {Barbosa M.A. and Monteiro F.J. and Correia R. and Leon B.}
}
@book {2497,
	title = {Porous Hydroxyapatite and Glass Reinforced Hydroxyapatite for Controlled Release of Sodium Ampicillin},
	series = {Key Engineering MaterialsKey Eng Mat},
	volume = {254-256},
	year = {2004},
	note = {Conference code: 62053Cited By (since 1996): 5Export Date: 21 November 2012Source: ScopusCODEN: KEMAELanguage of Original Document: EnglishCorrespondence Address: Queiroz, A.C.; Inst. de Engenharia Biom{\'e}dica, Laborat{\'o}rio de Biomateriais, Rua do Campo Alegre, 823, 4150-180 Porto, Portugal; email: aqueiroz@ineb.up.ptReferences: Krejci, C.B., Bissada, N.F., Farah, C., Greenwell, H., (1987) J Periodontol, 58, pp. 521-528;Seymour, R.A., Heasman, P.A., MacGregor, I.D.M., The pathogenesis of periodontal disease (1992) Drugs, Diseases, and the Periodontium, pp. 1-10. , MacGregor IDM, editor. Oxford: Oxford University Press; 
Steinberg, D., Friedman, M., Soskolne, A., Sela, M.N., (1990) J Periodontol, 61, pp. 393-398; 
Santos, J.D., Silva, P.L., Knowles, J.C., Talal, S., Monteiro, F.J., (1996) J Mater Sci: Mater Med, 7, pp. 187-189; 
Ferraz, M.P., Monteiro, F.J., Santos, J.D., (1999) J Biomed Mat Res, 45, pp. 376-383; 
Queiroz, A.C., Teixeira, S., Santos, J.D., Monteiro, F.J., Key Engineering Materials, , submitted; 
Nishihara, K., (1993) Clin Materials, 12, pp. 159-167; 
Queiroz, A.C., Santos, J.D., Monteiro, F.J., Gibson, I.R., Knowles, J.C., (2001) Biomaterials, 22, pp. 1393-1400
},
	month = {2004///},
	pages = {997 - 1000},
	address = {Porto},
	abstract = {Porous hydroxyapatite (HA) and glass reinforced hydroxyapatite (GRHA) with adequate macro and microporous structure were developed, aiming at being used as drug delivery carrier of antibiotics, for the in situ treatment of periodontitis. Materials were characterised by XRD and FTIR, presenting no changes from similar dense materials. Mercury intrusion porosimetry revealed micropores of less than 1 μm, accounting for 15\% of the total porosity. Compression tests have shown close values for HA and GRHA, with the former showing slightly higher values of strength. Ampicillin adsorption was more effective on porous than on dense HA, and was similar for HA and GRHA.},
	keywords = {Adsorption, Antibiotics, Coatings, Dense materials, Diseases, Drug delivery, Drug dosage, Fourier transform infrared spectroscopy, glass, Glass reinforced hydroxyapatite, hydroxyapatite, Mercury (metal), Porous, Porous materials, Scanning electron microscopy, Sodium, Strength of materials, Ultraviolet spectroscopy, X ray diffraction analysis},
	isbn = {10139826 (ISSN)},
	url = {http://www.scopus.com/inward/record.url?eid=2-s2.0-0347516111\&partnerID=40\&md5=a85b6393d2a4a2d3ee4b384bf4c3de78},
	author = {Queiroz, A.C. and Teixeira, S. and Santos, J.D. and Monteiro, F.J.},
	editor = {Barbosa M.A. and Monteiro F.J. and Correia R. and Leon B.}
}
@book {2490,
	title = {Preparation and Characterization of Calcium Phosphate Nanoparticles},
	series = {Key Engineering MaterialsKey Eng Mat},
	volume = {254-256},
	year = {2004},
	note = {Conference code: 62053Cited By (since 1996): 1Export Date: 21 November 2012Source: ScopusCODEN: KEMAELanguage of Original Document: EnglishCorrespondence Address: Manuel, C.M.; Inst. de Engenharia Biom{\'e}dica, Lab. de Biomaterials, Universidade do Porto, Rua do Campo Alegre, 823, 4150 -180 Porto, Portugal; email: cmmanuel@fe.up.ptReferences: Manuel, C.M., Ferraz, M.P., Monteiro, F.J., (2003) Key Engineering Materials, pp. 240-242;Jarcho, M., Bolen, C.H., Thomas, M.B., Bobick, J., Doremus, R.H., (1976) J Mat Sci, pp. 2027-2035; 
Jarcho, M., Salsbury, R.L., Thomas, M.B., Doremus, R.H., (1979) J Mat Sci, pp. 142-150; 
Puleo, D.A., Holleran, L.A., Doremus, R.H., Bizios, R., (1991) J Biomed Mat Res, 25, pp. 711-723; 
Fowler, B.O., Moreno, E.C., Brown, W.E., (1966) Arch. Oral Biol., 11, pp. 477-492
},
	month = {2004///},
	pages = {903 - 906},
	address = {Porto},
	abstract = {In this work, CaP nanoparticles were prepared by wet chemical precipitation using three different approaches and were characterised and quantified in terms of their composition. Different precipitating, ageing and drying temperatures were applied and affected HA to TCP ratio. Sintering induced formation of large agglomerates and affected the relative composition, specifically, increased concentrations of TCP as proved by SEM, FTIR and XRD. Different reactants also affected chemical final product composition. Contacts with fibroblasts and osteoblasts revealed better adhesion to sintered substrates.},
	keywords = {Agglomeration, Bioceramics, Biocompatibility, Bone, Calcium Compounds, Cell culture, Cytocompatibility, Fourier transform infrared spectroscopy, hydroxyapatite, nanoparticles, Nanostructured materials, orthopedics, Precipitation (chemical), Scanning electron microscopy, Synthesis (chemical), Tricalcium phosphate, Wet chemical precipitation, X ray diffraction analysis},
	isbn = {10139826 (ISSN)},
	url = {http://www.scopus.com/inward/record.url?eid=2-s2.0-0346885495\&partnerID=40\&md5=a9f5b3807570c06984809bcb048ffc33},
	author = {Manuel, C.M. and Foster, M. and Monteiro, F.J. and Ferraz, M.P. and Doremus, R.H. and Bizios, R.},
	editor = {Barbosa M.A. and Monteiro F.J. and Correia R. and Leon B.}
}
@book {2496,
	title = {Study of a Silicate Cement for Dental Applications},
	series = {Key Engineering MaterialsKey Eng Mat},
	volume = {254-256},
	year = {2004},
	note = {Conference code: 62053Cited By (since 1996): 1Export Date: 21 November 2012Source: ScopusCODEN: KEMAELanguage of Original Document: EnglishCorrespondence Address: Pereira, S.; Fac. de Medicina Dent{\'a}ria, Universidade do Porto, R. Dr. Manuel Pereira da Silva, 4200-393 Porto, PortugalReferences: Craig, R.G., Rovers, J.M., (2002) Restorative Dental Materials. 9th Ed., pp. 593-627. , St Louis: Mosby;Gladwin, M., Bagby, M., (2000) Clinical Aspects of Dental Materials. First Edition, pp. 81-92. , Philadelphia: Lippincott Williams \& Wilkins; 
Leinfelder, K.F., Changing Restorative Traditions: The Use of Bases and Liners (1994) JADA, 125, pp. 65-67; 
Macchi, R.L., (2000) Mat. Dentales. 3 a Ed., pp. 129-135. , Buenos Aires: Edit. M{\'e}dica P.americana S.A; 
Wise, D.L., (1995) Encyclopedic Handbook of Biomaterials and Bioengineering, pp. 1398-1411. , New York: Marcel Dekver; 
Gordan, V.V., Mj{\"o}r, I.A., Hucke, R.D., Smith, G.E., Effect of Different Liner Treatments on Postoperative Sensivity of Amalgam Restorations (1999) Quintessence Int, 30, pp. 55-59; 
Me, M., Nakai, H., Effect of Immersion in Water on Linear Expansion and Strength of Three Base/Liner Materials (1995) Dent Mater, 14, pp. 70-77; 
Leevailoj, C., Cochran, M.A., Matis, B.A., Moore, B.K., Platt, J.A., Microleakage of Posterior Packable Resin Composites with and without Flowable Liners (2001) Oper Dent, 26, pp. 302-307; 
Weiner, R.S., Weiner, L.K., Kugel, G., Teaching the Use of Bases and Liners: A Survey of the North American Dental Schools (1996) JADA, 127, pp. 1640-1645; 
Pereira, S., Branco, R., Cavalheiro, J., Afonso, A., Vasconcelos, M., (2003) Sealing Ability of a New Dental Base Material, , Bioeng; 
(1991) Specification for Dental Water-based Cements, , ISO 9917 (F)
},
	month = {2004///},
	pages = {659 - 662},
	address = {Porto},
	abstract = {Dental cements have a wide field of applications in clinical practice. The use as a base material is a very important one in dentistry. The aim of this study is to assess some relevant properties of a silicate cement (SC) developed for dental applications, comparing it with two other cements already commercialised, a zinc phosphate cement De Trey Zinc Cement Improved{\textregistered} (DT) and ProRootMTA{\textregistered}(MTA). Their compressive strength, dimensional changes and weight variation in water after setting, according to ISO standards were compared. The mean compressive strength of DT, MTA and SC were, respectively, 134MPa, 31MPa and 46MPa. There were no statistically significant differences for the three tested cements at the various time intervals, in respect to their weight variation or dimensional changes. However, there was a little loss of weight for DT (0.15\%) and for MTA (3\%) and a gain of 3\% for the SC. Regarding the dimensional changes, all materials undergo little expansion, more significant in the MTA and in the SC samples of 2,07\% and 0,4\%, respectively. The new Silicate Cement, presented enough compressive strength, low weight variation, very small dimensional changes and good adaptation to the surface of dental cavity. For these reasons this new cement could be a valuable proposal as a base material for dental applications.},
	keywords = {Biocompatibility, Body fluids, Ceramic materials, ceramics, Compressive Strength, Dental cement, Dental cements, Dental prostheses, Dimensional stability, Precipitation (chemical), Scanning electron microscopy, Silicate cements, Silicates, Stainless steel, Weight variation},
	isbn = {10139826 (ISSN)},
	url = {http://www.scopus.com/inward/record.url?eid=2-s2.0-0346255102\&partnerID=40\&md5=b43c6052d3f4c9fcaff59b75a9cad543},
	author = {Pereira, S. and Cavalheiro, J. and Branco, R. and Afonso, A. and Vasconcelos, M.},
	editor = {Barbosa M.A. and Monteiro F.J. and Correia R. and Leon B.}
}
@book {2498,
	title = {The Valences of Egg White for Designing Smart Porous Bloceramics: As Foaming and Consolidation Agent},
	series = {Key Engineering MaterialsKey Eng Mat},
	volume = {254-256},
	year = {2004},
	note = {Conference code: 62053Cited By (since 1996): 3Export Date: 21 November 2012Source: ScopusCODEN: KEMAELanguage of Original Document: EnglishCorrespondence Address: Lemos, A.F.; Ceramic Engineering Department, Campus de Santiago, University of Aveiro, 3810-193 Aveiro, Portugal; email: ilemos@cv.ua.ptReferences: De Groot, K., (1980) Biomaterials, 1, p. 47;Ohgushi, H., Okumura, M., Yoshikawa, T., Inoue, K., Senpuku, N., Tamai, S., Shors, E.C., (1992) J. Biomed. Mater. Res., 26, p. 885; 
Omatete, O., Janney, M.A., Strehlow, R.A., (1991) Am. Ceram Soc.Bull., 70, p. 1641; 
Kosmac, T., Novak, S., Sajko, M., (1995) Fourth Euro Ceramics Vol. 1, Basic Science: Developments, 1. , ed. C. Galassi. Gruppo Editoriale Faenza Editrice S.p.a., Italy; 
Graule, T.J., Baader, F.H., Gauckler, L.J., (1994) Cfi/Ber. DKH., 71, p. 317; 
Novich, B.E., Sundback, C.A., Adams, R.W., (1992) Ceramic Transactions, 26. , ed. M. J. Cima. American Ceramic Society, USA; 
Lycfeldt, O., Ferreira, J.M.F., (1998) J. Eur. Ceram. Soc., 18, p. 131; 
Rives, R.D., U. S. Patent 4113480 (1976)Lycfeldt, O., Brandt, J., Lesca, S., (2000) J. Eur. Ceram. Soc., 20 (14-15), p. 2551; 
Olhero, S.M., Tar{\`\i}, G., Coimbra, M.A., Ferreira, J.M.F., (2000) J. Europ. Ceram. Soc., 20 (4), p. 423; 
Dhara, S., Bhargava, P., (2001) J. Am. Ceram. Soc., 84 (12), p. 3048; 
Janney, M.A., Omatete, O., Walls, C., Nunn, S., Ogle, R., Westmoreland, G., (1998) J. Am. Ceram. Soc., 81 (3), p. 581; 
Lumry, R., Eyring, H., (1954) J. Phys. Chem., 58, p. 110; 
Lemos, A.F., Santos, J.D., Ferreira, J.M.F., (2003) Advanced Materials Forum
},
	month = {2004///},
	pages = {1045 - 1048},
	address = {Porto},
	abstract = {Porous hydroxyapatite bioceramics were developed by a new direct consolidation method based on the foaming capability of egg white and on its gelling properties on heating, thus acting both as pore former and consolidator agent. The bubble forming capability of fresh egg white, due to the presence of a globular protein - albumen, allows the formation of a stable foam when added to a ceramic suspension. Adding a sufficient amount of the globular protein to the suspension revealed to be crucial to control either the pore volume fraction as well as the gelling behaviour and the rigidity of the green bodies. This consolidation method can be performed in nonporous moulds, enabling materials with controlled porosity to be obtained by varying the egg white content in the slip composition. After drying, burnout and sintering, materials with ultimate porosities close to 75 \% were obtained.},
	keywords = {Bioceramics, Biodegradation, Bone-grafting, Ceramic materials, Consolidation technique, Consolidation techniques, Egg-white, heating, hydroxyapatite, morphology, Pore size, porosity, Porous ceramics, Porous materials, Proteins, Slurries, Solidification},
	isbn = {10139826 (ISSN)},
	url = {http://www.scopus.com/inward/record.url?eid=2-s2.0-0347516109\&partnerID=40\&md5=e6413ccdd076de29b881e380890e42ac},
	author = {Lemos, A.F. and Ferreira, J.M.F.},
	editor = {Barbosa M.A. and Monteiro F.J. and Correia R. and Leon B.}
}
