



@article {2401,
	title = {Titanium dental implants coated with Bonelike{\textregistered}: Clinical case report},
	journal = {Thin Solid FilmsThin Solid Films},
	volume = {515},
	year = {2006},
	note = {Cited By (since 1996): 4Export Date: 21 November 2012Source: ScopusCODEN: THSFAdoi: 10.1016/j.tsf.2005.12.151Language of Original Document: EnglishCorrespondence Address: Santos, J.D.; INEB-Instituto de Engenharia Biom{\'e}dica, Laborat{\'o}rio de Biomateriais, Rua Campo Alegre, 823, 4150-180 Porto, Portugal; email: jdsantos@fe.up.ptReferences: Murugan, R., Ramakrishna, S., (2005) Compos. Sci. Technol., 65, p. 2385;Boyle, W.J., Simonet, W.S., Lacey, D.L., (2003) Nature, 423, p. 337; 
Karabuda, C., Ozdemir, O., Tosun, T., Anil, A., Olgac, V., (2001) J. Periodontol., 72, p. 1436; 
Placko, H.E., Mishra, S., Weimer, J.J., Lucas, L.C., (2000) Int. J. Oral Maxillofac. Implants, 15, p. 355; 
Jung, Y.C., Han, C.H., Lee, I.S., Kim, H.E., (2001) Int. J. Oral Maxillofac. Implants, 16, p. 809; 
Kong, Y.M., Kim, D.H., Kim, H.E., Heo, S.J., Koak, J.Y., (2002) J. Biomed. Mater. Res., Part B Appl. Biomater., 63, p. 714; 
Schutz, R.W., Thomas, D.E., (1987) Metals Handbook. ed. 9, 13, p. 669. , Davis J.R. (Ed), American Society for Metals, Cleveland, OH; 
Tsui, Y.C., Doyle, C., Clyne, T.W., (1998) Biomaterials, 19, p. 2015; 
Lavos-Valereto, I.C., Wolynec, S., Deboni, M.C.Z., Konig Jr., B., (2001) J. Biomed. Mater. Res., Part B Appl. Biomater., 58, p. 727; 
Lacefield, W.R., (1993) An Introduction to Bioceramics, , Hench L.L., and Wilsion J. (Eds), World Scientific, Singapore; 
Golec, T.S., Krauser, J.T., (1992) Dent. Clin. North Am., 36, p. 39; 
Block, M.S., Kkent, J.N., (1992) Dent. Clin. North Am., 36, p. 27; 
Yukna, R.A., (1992) Dent. Clin. North Am., 36, p. 97; 
Baltag, I., Watanabe, K., Kusakari, H., Taoyuki, N., Miyakawa, O., Kobayashi, M., Ito, N., (2000) J. Biomed. Mater. Res., Part B Appl. Biomater., 53, p. 76; 
Wheeler, S.L., (1996) Int. J. Oral Maxillofac. Implants, 11, p. 340; 
Tsui, Y.C., Doyle, C., Clyne, T.W., (1998) Biomaterials, 19, p. 2031; 
(1981) Science and Medical Applications of Hydroxyapatite, , Conish H., Aoki H., and Sawai K. (Eds), Takyama Press Systems Centre Co., Tokyo; 
Santos, J.D., Knowles, J.C., Reis, R.L., Monteiro, F.J., Hastings, G.W., (1994) Biomaterials, 15, p. 5; 
Santos, J.D., Lakhan, J.J., Monteiro, F.J., (1995) Biomaterials, 16, p. 521; 
Lopes, M.A., Santos, J.D., Monteiro, F.J., Knowles, J.C., (1998) J. Biomed. Mater. Res., 39, p. 244; 
Lopes, M.A., Monteiro, F.J., Santos, J.D., (1999) Biomaterials, 20, p. 2085; 
Lopes, M.A., Silva, R.F., Monteiro, F.J., Santos, J.D., (1999) Biomaterials, 21, p. 749; 
Lopes, M.A., Knowles, J.C., Santos, J.D., Monteiro, F.J., Olsen, I., (2000) Biomaterials, 21, p. 1165; 
Lopes, M.A., Knowles, J.C., Santos, J.D., Monteiro, F.J., Oslen, I., (1998) J. Biomed. Mater. Res., 41, p. 649; 
Ferraz, M.P., Fernandes, M.H., Santos, J.D., Monteiro, F.J., (2001) J. Mater. Sci., Mater. Med., 12, p. 629; 
Ferraz, M.P., Monteiro, F.J., Serro, A.P., Saramago, B., Gibson, I.R., Santos, J.D., (2001) Biomaterials, 22, p. 3105; 
Silva, P.L., Santos, J.D., Monteiro, F.J., Knowles, J.C., (1998) Surf. Coat. Technol., 102, p. 191; 
Ferraz, M.P., Fernandes, M.H., Santos, J.D., Monteiro, F.J., (1999) J. Mater. Sci., Mater. Med., 10, p. 567; 
Lobato, J.V., Sooraj Hussain, N., Sousa, R.C., Maur{\'\i}cio, A.C., Santos, J.D., (2005) Br. J. Oral Maxillofac. Surg., , (Communicated); 
Br{\"a}nemark, P.I., Svensson, B., van Steenberghe, D., (1995) Clin. Oral Implants Res., 6 (4), p. 227; 
Strnad, Z., Strand, J., Povysil, C., Urban, K.K., (2000) Int. J. Oral Maxillofac. Implants, 15, p. 483; 
Ross, M.H., Romrell, L.J., Kaye, G.I., (1995) Histology, a Text and Atlas. ed. 3, , Williams \& Wilkins, New York
},
	month = {2006///},
	pages = {279 - 284},
	abstract = {The aim of the study was to evaluate the direct bone bonding and osteointegration of the commercial pure (cp Ti) implants coated with Bonelike{\textregistered} synthetic bone graft by plasma spraying. The Bonelike{\textregistered} coated implant was placed in the mandible of a 40-year-old patient and it was removed after a healing period of 3 months with a trephine of 6 mm diameter. The structure of the coating and new bone/implant interface of retrieved samples were evaluated using scanning electron microscopy (SEM) and histological analysis using light microscopy. In vivo microstructure observations of Bonelike{\textregistered} coated retrieved implants showed excellent bone remnants on its surface without any tissue and inflammatory signs observed. The reported Bonelike{\textregistered} coated (cp Ti) implants improved primary stability, which may increase the lifetime of the implant. Bonelike{\textregistered} coated dental implants proved to be highly bioactive with extensive new bone formation and strongly bonded to Bonelike{\textregistered} coating. {\textcopyright} 2005 Elsevier B.V. All rights reserved.},
	keywords = {Bone, Bone Regeneration, Bone/implant interface, Bonelike{\textregistered} coatings, Clinical applications, Dental Implants, Dental prostheses, Hip prostheses, Medical applications, Optical microscopy, Plasma spraying},
	isbn = {00406090 (ISSN)},
	url = {http://www.scopus.com/inward/record.url?eid=2-s2.0-33750227720\&partnerID=40\&md5=868e14c9913670ea7c14afbf49c8959e},
	author = {Lobato, J.V. and Sooraj Hussain, N. and Botelho, C.M. and Maur{\'\i}cio, A.C. and Lobato, J.M. and Lopes, M.A. and Afonso, A. and Ali, N. and Santos, J.D.}
}
@book {2486,
	title = {CaO-P                    2O
                    5 Glass-Hydroxyapatite Thin Films Obtained by Laser Ablation: Characterisation and In Vitro Bioactivity Evaluation
},
	series = {Key Engineering MaterialsKey Eng Mat},
	volume = {254-256},
	year = {2004},
	note = {Conference code: 62053Cited By (since 1996): 1Export Date: 21 November 2012Source: ScopusCODEN: KEMAELanguage of Original Document: EnglishCorrespondence Address: Ferraz, M.P.; Inst. de Engenharia Biom{\'e}dica, Laborat{\'o}rio de Biomateriais, Rua Campo Alegre 823, 4150-180 Porto, Portugal; email: mpferraz@ufp.ptReferences: Arias, J.L., (1997) J Mater. Sci. Mater. Med., 8, pp. 873-876;Peraire, C., (1997) 13 th European Conference on Biomaterials, p. 75. , G{\"o}teborg, Sweden, 4-7 Sept; 
Ferraz, M.P., Monteiro, F.J., Santos, J.D., (1999) J Biomed Mater Res, 45, p. 373; 
Ferraz, M.P., Fernandes, M.H., Trigo-Cabral, A., Santos, J.D., Monteiro, F.J., (1999) J. Mat Sci: Mat. Med, 10 (9), p. 567
},
	month = {2004///},
	pages = {347 - 350},
	address = {Porto},
	abstract = {Hydroxyapatite (HA) coatings have been applied to improve adhesion of non-cemented implants to host bone. Plasma spraying is the most common technique leading to thick calcium phosphate films (\&gt;120μm). Pulse laser deposition (PLD), is a possible alternative method to obtain thin (\&lt;10 μm), well adherent hydroxyapatite (HA) films. Similarly to synthetic HA, biological apatites contain Ca                        2+, PO
                        4
                        3- and OH
},
	keywords = {2O, 5 glass, Adhesion, Bioactivity, Bone, Calcium Compounds, CaO-P, Coatings, Deposition, Energy dispersive spectroscopy, Homogeneous mixtures, Hydroxylapatite thin films, Implants (surgical), In vitro bioactivity, Laser ablation, Plasma spraying, Scanning electron microscopy, Thin films, X ray diffraction},
	isbn = {10139826 (ISSN)},
	url = {http://www.scopus.com/inward/record.url?eid=2-s2.0-0347516195\&partnerID=40\&md5=ddd47b73956669a35aa9041ce9102612},
	author = {Ferraz, M.P. and Monteiro, F.J. and Gi{\~a}o, D. and Leon, B. and Gonzalez, P. and Liste, S. and Serra, J. and Arias, J. and Perez-Amor, M.},
	editor = {Barbosa M.A. and Monteiro F.J. and Correia R. and Leon B.}
}
@book {2485,
	title = {Effects of some variables on R.F. Magnetron Sputtered Hydroxyapatite Coatings on Titanium},
	series = {Key Engineering MaterialsKey Eng Mat},
	volume = {254-256},
	year = {2004},
	note = {Conference code: 62053Export Date: 21 November 2012Source: ScopusCODEN: KEMAELanguage of Original Document: EnglishCorrespondence Address: Silva, R.A.; Inst. Sup. de Engenharia do Porto, Rua Dr. Antonio Bernardino A., 431, 4200-072 Porto, Portugal; email: ras@isep.ipp.ptReferences: Hing, K.A., Best, S.M., Tanner, K.E., Bonfield, W., Revell, P.A., (1997) Journal of Materials Science: Materials in Medicine, 8, pp. 731-736;Raynaud, S., Champion, E., Bernache-Assolant, D., Tetard, D., (1998) Journal of Materials Science: Materials in Medicine, 9, pp. 221-227; 
Weng, J., Liu, X., Zhang, X., De Groot, K., (1996) Journal of Biomedical Materials Research, 30, pp. 5-11; 
Gross, K.A., Gross, V., Berndt, C.C., (1998) Journal of the American Ceramic Society, 81 (1), pp. 106-112; 
Edwards, J.T., Brunski, J.B., Higuchi, (1997) Journal of Biomedical Materials Research, 36, pp. 454-468; 
Yang, C.Y., Lin, R.M., Wang, B.C., Lee, T.M., Chang, E., Hang, Y.S., Chen, P.Q., (1997) Journal of Biomedical Materials Research, 37, pp. 335-345; 
Ogiso, M., Yamamura, M., Kuo, P.T., Borgese, D., Matsumoto, T., (1998) Journal of Biomedical Materials Research, 39, pp. 364-372; 
Van Dijk, K., Schaeken, H.G., Wolke, J.G.C., Maree, C.H.M., Habraken, F.H.P.M., Jansen, J.A., (1995) Materials in Clinical Applications, pp. 249-256. , P. Vincenzini, (ed.); 
Yoshinari, M., Hayakawa, T., Wolke, J.G.C., Nemoto, K., Jansen, J.A., (1997) Journal of Biomedical Materials Research, 37, pp. 60-67; 
Wolke, J.G.C., De Groot, K., Jansen, J.A., (1998) Journal of Biomedical Materials Research, 39, pp. 524-530
},
	month = {2004///},
	pages = {323 - 326},
	address = {Porto},
	abstract = {RF sputtering may be used to produce thin, well adherent bioactive coatings with long term stability to ensure contact with bone tissue. RF Sputtered Hydroxyapatite (HA) coatings were produced onto Ti at 200 and 150 W. S.E.M. analysis indicated that films obtained with 200 W were thicker than those with 150 W. Significant variations were observed, depending on the location of the substrates with respect to the sample holder in the sputtering chamber, with thickness ranging from 1.8 to 3.2 μm. EDS analysis of 200 W films revealed the presence of Ca and P, in ratios typical of HA. XPS of thinner films obtained at 150 W, showed Ca and P, but also some carbonate probably partially substituting OH. Anodic polarisation curves of samples coated at 200 W and 150 W and for different sputtering times, compared to Ti substrate, indicate that HA films were protective and that the degree of protection increased with film thickness, i.e., with power intensity and time of deposition.},
	keywords = {Bioactive coatings, Bone, Coatings, Corrosion protection, hydroxyapatite, Magnetron sputtering, Plasma spraying, Polarization, RF sputtering, Scanning electron microscopy, Sputter deposition, Sputtering chambers, Thin films, Titanium},
	isbn = {10139826 (ISSN)},
	url = {http://www.scopus.com/inward/record.url?eid=2-s2.0-0347659048\&partnerID=40\&md5=3b3caf6fcde1c71242d25a74b296f870},
	author = {Silva, R.A. and Sousa, M. and Monteiro, F.J. and Barral, R. and Santos, J.D. and Lopes, M.A.},
	editor = {Barbosa M.A. and Monteiro F.J. and Correia R. and Leon B.}
}
@article {2561,
	title = {Flow cytometry analysis of the effects of pre-immersion on the biocompatibility of glass-reinforced hydroxyapatite plasma-sprayed coatings},
	journal = {BiomaterialsBiomaterials},
	volume = {21},
	year = {2000},
	note = {Cited By (since 1996): 22Export Date: 21 November 2012Source: ScopusCODEN: BIMADdoi: 10.1016/S0142-9612(99)00249-5PubMed ID: 10721750Language of Original Document: EnglishCorrespondence Address: Olsen, I.; Department of Periodontology, Eastman Dental Institute, University College London, 256 Gray{\textquoteright}s Inn Road, London WC1X 8LD, United Kingdom; email: iolsen@eastman.ucl.ac.ukChemicals/CAS: Biocompatible Materials; bone sialoprotein; Coated Materials, Biocompatible; Durapatite, 1306-06-5; Fibronectins; SialoglycoproteinsManufacturers: Plasma Biotal, United KingdomReferences: Passuti, N., Daculsi, G., Martin, S., Macroporous calcium phosphate ceramics for long bone surgery in human and dogs - Clinical and histological studies (1990) Clinical Implant Materials, pp. 255-258. , V. Soltesz, \& A. Lee. Amsterdam: Elsevier Science Publishers;Legeros, R., Calcium phosphate materials in restorative dentistry (1988) A Review. Adv Dent Res, 2, pp. 164-180; 
Hench, L.L., Bioactive ceramics: From concept to clinic (1992) J Am Ceram Soc, 74, pp. 1487-1510; 
Conish, H., Aoki, H., Sawai, K., (1981) Science and Medical Applications of Hydroxyaptite, , editors Tokyo: Takyama Press System Centre Co; 
Raemdonck, W., Ducheyne, P., Meester, P., Calcium phosphate ceramics (1984) Metal and Ceramic Materials, pp. 143-166. , P. Ducheyne, \& G.W. Hastings. Boca Raton, FL, USA: CRC Press; 
Rey, C., Freche, M., Heughebaert, M., Vignoles, M., Apatite chemistry in biomaterial preparation, shaping and biological behaviour (1991) Fourth Symposium on Ceramics in Medicine - Bioceramics 4, pp. 57-64. , G.W. Hastings, \& K.E. Tanner. London: Butterworth-Heinemann; 
Nagase, M., Abe, Y., Udagwa, E., Toxicity of silica-containing calcium phosphate glasses demonstrated in mice (1992) Biomaterials, 13, pp. 172-175; 
Burnie, J., Gilchrist, T., Controlled released glass - A new biomaterial (1983) Ceramics in Surgery, pp. 169-176. , P. Vicenzini. Amsterdam: Elsevier Science Publishers; 
Burnie, F., Gilchrist, T., (1983) Ceramics in Surgery, pp. 177-180. , P. Vicenzini. Amsterdam: Elsevier Science; 
Rawlings, R.D., Rogers, P.S., Stokes, P.M., Glass-ceramics containing apatite (1987) High Tech Ceramics, pp. 73-82. , P. Vicenzini. Amsterdam: Elsevier Science Publishers; 
Santos, J.D., Knowles, J.C., Reis, R.L., Monteiro, F.J., Hastings, G.W., Microstructural characterization of glass-reinforced hydroxyapatite composites (1994) Biomaterials, 15, pp. 5-10; 
Santos, J.D., Lakhan, J.J., Monteiro, F.J., Surface modifications of glass-reinforced hydroxyapatite composites (1995) Biomaterials, 16, pp. 521-526; 
Ferraz, M.P., Monteiro, F.J., Santos, J.D., In vitro bioactivity and osteocompatibility evaluation of plasma sprayed hydroxyapatite/glass composite coatings onto Ti-6Al-4V substrates (1997) Ninth International Conference on Biomedical Engineering, pp. 557-559. , In: Goh JCH, editor Singapore; 
Klein, C.P.A.T., Patka, P., Van Der Lubbe, H.B.M., Plasma-sprayed coatings of tetracalciumphosphate, hydroxyl-apatite, and α-TCP on titanium alloy: An interface study (1991) J Biomed Mater Res, 25, pp. 53-65; 
Jansen, J.A., Van Der Waerden, J.P., Wolke, J.G., Histologic investigation of the biologic behavior of different hydroxyapatite plasma-sprayed coatings in rabbits (1993) J Biomed Mater Res, 4, pp. 603-610; 
De Bruijn, J.D., Klein, C.P.A.T., De Groot, K., Van Blitterswijk, C.A., The ultrastructure of the bone-hydroxyapatite interface in vitro (1992) J Biomed Mater Res, 26, pp. 1365-1382; 
Frayssinet, P., Tourenne, F., Rouquet, P., Conte, P., Delga, C., Bonel, G., Comparative biological properties of HA plasma-sprayed coatings having different crystallinities (1994) J Mater Sci: Mater Med, 5, pp. 11-17; 
Lugscheider, E., Knepper, M., Heimberg, B., Dekker, A., Kirkpatrick, C.J., Cytotoxicity investigations of plasma-sprayed calcium-phosphate coatings (1994) J Mater Sci: Mater Med, 5, pp. 371-375; 
Courteney-Harris, R.G., Kayser, M.V., Downes, S., Comparison of the early production of extracellular matrix on dense hydroxyapatite and hydroxyapatite-coated titanium in cell and organ culture (1995) Biomaterials, 16, pp. 489-495; 
Labat, B., Chanson, A., Frey, J., Effects of γ-alumina and hydroxyapatite coatings on the growth and metabolism of human osteoblasts (1995) J Biomed Mater Res, 29, pp. 1397-1401; 
De Santis, D., Guerriero, C., Nocini, P.F., Ungersbock, A., Richards, G., Gotte, P., Armato, U., Adult human bone cells derived from jaw bones cultured on plasma-sprayed or polished surfaces to titanium or hydroxyapatite discs (1996) J Mater Sci: Mater Med, 7, pp. 21-28; 
Pizzoferrato, A., Ciapetti, G., Stea, S., Cenni, E., Ariola, C.R., Granchi, D., Savarino, L., Cell culture methods for testing biocompatibility (1994) Clin Mater, 15, pp. 173-190; 
Puleo, D.A., Preston, K.E., Shaffer, J.B., Bizios, R., Examination of osteoblast-orthopaedic biomaterial interactions using molecular techniques (1993) Biomaterials, 14, pp. 111-114; 
Clifford, C.J., Downes, S., A comparative study of the use of colorimetric assays in the assessment of biocompatibility (1996) J Mater Sci: Mater Med, 7, pp. 637-643; 
Ferraz, M.P., Monteiro, F.J., Santos, J.D., CaO-P 2O 5 glass hydroxyapatite double layer plasma sprayed coatings: In vitro evaluation (1999) J Biomed Mater Res, 45, pp. 376-383; 
Ferraz, M.P., Fernandes, M.H., Trigo Cabral, A., Santos, J.D., Monteiro, F.J., In vitro growth and differentiation of osteoblast-like human bone marrow cells on glass reinforced HA plasma sprayed coatings (1999) J Mater Sci: Mater Med, 10, pp. 567-576; 
Macey, M.G., (1994) Flow Cytometry - Clinical Applications, , editor Oxford: Blackwell Scientific; 
Shapiro, H.M., (1995) Practical Flow Cytometry, , New York: Wiley-Liss; 
Melamed, M.R., Lindmo, T., Mandelsohn, M.L., (1990) Flow Cytometry and Sorting, , editors New York: Wiley-Liss; 
Muirhead, K.A., Horan, P.K., Applications of flow cytometry to tissue culture systems (1983) Adv Cell Culture, 3, pp. 57-91; 
Corver, W.E., Cornelisse, C.J., Fleuren, G.J., Simultaneous measurement of two cellular antigens and DNA using fluorescein-isothiocyanate, R-phycoerythrin and propidium iodide on a standard FACScan (1994) Cytometry, 15, pp. 117-128; 
Pande, G., Kumar, N.A., Manogaran, P.S., Flow cytometric study of changes in intracellular free calcium during the cell cycle (1996) Cytometry, 24, pp. 55-63; 
Kamiya, I., Okuda, K., Hara, K., Flow cytometric identification and detection of Porphyromonas gingivalis by a LPS specific monoclonal antibody (1994) J Periodont, 65, pp. 309-315; 
Lopes, M.A., Knowles, J.C., Kuru, L., Santos, J.D., Monteiro, F.J., Olsen, I., Flow cytometry for assessing biocompatibility (1998) J Biomed Mater Res, 41, pp. 649-656; 
Ferraz, M.P., Knowles, J.C., Olsen, I., Monteiro, F.J., Santos, J.D., Flow cytometry analysis of the effects of glass on the biocompatibility of plasma-sprayed hydroxyapatite/CaO-P 2O 5 coatings J Biomed Mater Res, , in press; 
Cowles, E.A., DeRome, M.E., Pastizzo, G., Brailey, L.L., Gronowicz, G.A., Mineralization and the expression of matrix proteins during in vivo bone development (1998) Calcif Tissue Int, 62, pp. 74-82; 
Globus, R.K., Dotty, S.B., Lull, J.C., Holmuhamedov, E., Humphries, M.J., Damsky, C.H., Fibronectin is a survival factor for differentiated osteoblasts (1998) J Cell Sci, 111, pp. 1385-1393; 
Clover, J., Gowen, M., Are MG63 and HOS TE 85 human osteosarcoma cell lines representative models of the osteoblastic phenotype? (1994) Bone, 15, pp. 585-591; 
Wojciech, G., Melamed, M.R., Darzynkiewicz, Z., Analysis of apoptosis by flow cytometry (1998) Flow Cytometry Protocols, pp. 217-238. , M.J. Jaroszeski, \& R. Heller. Totowa, NJ, USA: Humana Press
},
	month = {2000///},
	pages = {813 - 820},
	publisher = {Elsevier Science Ltd},
	abstract = {Multilayered coatings composed of mixtures of HA and P                        2O
                        5-based bioactive glasses are of potential clinical benefit in orthopaedic and dental surgery. Pre-immersion of these materials has been reported to further enhance their efficacy in vivo, although the precise biological effects of this treatment are not yet known. In this study we have therefore prepared double-layer plasma-sprayed coatings and evaluated the effects of pre-immersion on the growth and function of human osteosarcoma cells in vitro, using the MTT assay and flow cytometry analysis, respectively. The results showed that the increase in numbers of viable cells was the same or elevated following incubation on the pre-immersed HA and glass-reinforced HA coatings compared with the non-immersed materials. In addition, the expression of bone sialoprotein and fibronectin, two key connective tissue antigens, was up-regulated in cultures grown on the pre-immersed surfaces compared with the non-treated materials. Moreover, cell numbers and antigen expression both improved as the proportion of glass increased, particularly in the pre-immersed samples. Our findings thus suggest that the immersion treatment of these materials appeared to improve the response of these bone-like cells. Copyright (C) 2000 Elsevier Science Ltd.
Multilayered coatings composed of mixtures of HA and P
                        2O
                        5-based bioactive glasses are of potential clinical benefit in orthopaedic and dental surgery. Pre-immersion of these materials has been reported to further enhance their efficacy in vivo, although the precise biological effects of this treatment are not yet known. In this study we have therefore prepared double-layer plasma-sprayed coatings and evaluated the effects of pre-immersion on the growth and function of human osteosarcoma cells in vitro, using the MTT assay and flow cytometry analysis, respectively. The results showed that the increase in numbers of viable cells was the same or elevated following incubation on the pre-immersed HA and glass-reinforced HA coatings compared with the non-immersed materials. In addition, the expression of bone sialoprotein and fibronectin, two key connective tissue antigens, was up-regulated in cultures grown on the pre-immersed surfaces compared with the non-treated materials. Moreover, cell numbers and antigen expression both improved as the proportion of glass increased, particularly in the pre-immersed samples. Our findings thus suggest that the immersion treatment of these materials appeared to improve the response of these bone-like cells.
},
	keywords = {antigen expression, article, Bioactive glasses, Biocompatibility, Biocompatible Materials, Biomaterials, Cell culture, Cell Division, cell growth, cell proliferation, Cell size, Coated Materials, Biocompatible, controlled study, cytology, Cytoplasmic Granules, Dental Materials, drug manufacture, Durapatite, Fibronectin, Fibronectins, flow cytometry, Flow cytometry analysis, glass, Glass fibers, Glass-reinforced hydroxyapatite, Growth kinetics, human, human cell, Humans, hydroxyapatite, in vitro study, materials testing, orthopedics, Osteosarcoma, osteosarcoma cell, Phosphates, Plasma spraying, Pre-immersion, priority journal, protein expression, Proteins, Sialoglycoproteins, sialoprotein, Sprayed coatings, Surface Properties, technique, Tumor Cells, Cultured},
	isbn = {01429612 (ISSN)},
	url = {http://www.scopus.com/inward/record.url?eid=2-s2.0-0034004660\&partnerID=40\&md5=4f46f4bb4619ff65dccbfcc0fdcd03b1},
	author = {Ferraz, M.P. and Knowles, J.C. and Olsen, I. and Monteiro, F.J. and Santos, J.D.}
}
@article {2574,
	title = {CaO-P                    2O
                    5 glass hydroxyapatite double-layer plasma-sprayed coating: In vitro bioactivity evaluation
},
	journal = {Journal of Biomedical Materials ResearchJ. Biomed. Mater. Res.},
	volume = {45},
	year = {1999},
	note = {Cited By (since 1996): 31Export Date: 21 November 2012Source: ScopusCODEN: JBMRBdoi: 10.1002/(SICI)1097-4636(19990615)45:4<376::AID-JBM13>3.0.CO;2-SLanguage of Original Document: EnglishCorrespondence Address: Santos, J.D.; Departamento Engenharia Metalurgica, FEUP, Universidade do Porto, R. dos Bragas, 4099 Porto Codex, PortugalChemicals/CAS: Alloys; Calcium, 7440-70-2; CaO-SiO2-P2O5-CaF2 glass; Coated Materials, Biocompatible; Durapatite, 1306-06-5; Phosphates; Powders; Resin Cements; Solutions; titanium alloy (TiAl6V4), 12743-70-3; Titanium, 7440-32-6References: Denissen, H., Mangano, C., Venini, G., (1985) Hydroxylapatite Implants., , Padua: Piccin Nuova Libraria, S.P.A;Van Raemdonck, W., Ducheyne, P., De Meester, P., Calcium phosphate ceramics (1984) Metal and Ceramic Biomaterials, pp. 143-166. , Ducheyne P, Hastings GW, editors, Boca Raton, FL: CRC Press; 
Legeros, R.Z., Incorporation of magnesium in synthetic and biological apatites (1994) Tooth Enamel IV., pp. 32-36. , Fearnead RW, editor. Amsterdam: Elsevier Science; 
Jha, L.J., Best, S.M., Knowles, J.C., Rehman, I., Santos, J.D., Bonfield, W., Preparation and characterization of fluoride-substituted apatites (1997) J Mater Sci Mater Med, 8, pp. 185-191; 
Geesink, R.G.T., Degroot, K., Chemical implant fixation using hydroxyl-apatite coatings (1987) Clin Orthop, 2, pp. 147-170; 
Radin, S., Ducheyne, P., The effect of plasma sprayed induced changes in the characteristics on the in vitro stability of calcium phosphate ceramics (1990) Transactions of the 16th Annual Meeting of the Society for Biomaterials XIII, pp. 128-130; 
Cook, S.D., Thomas, K.A., Hydroxyapatite coated porous titanium for use as an orthopaedic biologic attachment (1989) Clin Orthop, 230, pp. 303-312; 
McPherson, R., Gane, N., Bastow, T.J., Structural characterization of plasma-sprayed hydroxylapatite coatings (1995) J Mater Sci Mater Med, 6, pp. 327-334; 
De Groot, K., Geesink, R., Klein, C.P.A.T., Serekian, P., Plasma sprayed coatings of hydroxylapatite (1987) J Biomed Mater Res, 21, pp. 1375-1381; 
Ravagliolli, A., Krajewszki, A., Laudadio, P., Presutti, L., Cunsolo, E., Martinetti, R., About ceramics for stapedial prostheses and the ossicular chain (1992) Fifth International Symposium on Ceramics in Medicine-Bioceramics 5, pp. 451-458. , Yamamuro T, Kokubo T, Nakamura T, editors. Kyoto: Kobunshi Kankokai; 
Hastings, G.W., Daily, D., Hydroxyapatite coatings (1989) First International Symposium on Ceramics in Medicine-Bioceramics 1, pp. 355-358. , Oonishi H, Aoki H, Sawai K, editors. Tokyo: Ishiyaku EuroAmerica; 
Aoki, H., Medical applications of hydroxyapatite (1991) Science and Medical Applications of Hydroxyaptite, pp. 175-192. , Aoki H, Sawai K, editors. Tokyo: Takyama Press System Centre; 
Rey, C., Calcium phosphate biomaterials and bone mineral: Differences in composition, structures and properties (1990) Biomaterials, 11, pp. 13-15; 
Evans, G., Behiri, J., Currey J, B.W., Microhardness and young{\textquoteright}s modulus in cortical bone exhibiting a wide range of mineral volume fractions, and in a bone analogue (1990) J Mater Sci Mater Med, 1, pp. 38-43; 
Rey, C., Froche, M., Heughebaert, M., Heughebaert, J.C., Lacout, J.L., Vignoles, M., Apatite chemistry in biomaterial preparation, shaping and biological behaviour (1991) Fourth International Symposium on Ceramics in Medicine-Bioceramics 4, pp. 57-60. , Bonfield W, Hastings GW, Tanner KE, editors. London: Butterworth-Heinemann; 
Knowles, J.C., Talal, S., Santos, J.D., Sintering effects in a glass reinforced hydroxyapatite (1996) Biomaterials, 17, pp. 1437-1442; 
Kokubo, T., Hayashi, T., Sakka, S., Kitsugi, T., Yamamuro, T., Takagi, M., Shibuya, T., Surface structure of a load bearable bioactive glass-ceramic A-W (1981) High Tech Ceramics, pp. 175-184. , Vicenzini P, editor. Amsterdam: Elsevier Science Publisher BV; 
Hench, L., Anderson, O.H., LaTorre, G.P., The kinetics of bioactive ceramics. Part III: Surface reactions for bioactive glasses compared with inactive glass (1991) Fourth International Symposium on Ceramics in Medicine-Bioceramics 4, , Bonfield W, Hastings GW, Tanner KE, editors. London: Butterworth-Heinemann; 155-162; 
Daculsi, G., LeGeros, R.Z., Heughebart, M., Barbieux, I., Formation of a carbonate apatite crystals after implantation of calcium phosphate ceramics (1990) Calcif Tissue Int, 46, pp. 20-27; 
Kokubo, T., Ito, S., Huang, Z.T., Hayashi, T., Sakka, S., Kitsugi, T., Yamamuro, T., Ca-P rich layer formed on high strength bioactive glass-ceramic A-W (1990) J Biomed Mater Res, 24, pp. 331-343; 
Ducheyne, P., Radin, S., Ishikawa, K., Kim, C.S., Dissolution and precipitation of calcium phosphate phases on biomaterials correlates with in vivo bioactivity (1991) Fourth International Symposium on Ceramics in Medicine-Bioceramics 4, pp. 135-144. , Bonfield W, Hastings GW, Tanner KE, editors. London: Butterworth-Heinemann; 
Rey, C., Hina, A., Amrah-Bouali, S., Ranz, X., Surface reactions of calcium-phosphate bioceramics, comparison with bone mineral surface chemistry (1995) Fourth Euro Ceramics., 8, pp. 301-312. , Ravaglioli A, editor. Faenza: Gruppo Editoriale Faenza Editrice; 
Van Blitterswijk, C.A., Grote, J.J., Kuypers, W., Blok-Van Hoek, C.J.G., Daems, W.T., Bioreactions at the tissue/hydroxyapatite interface (1985) Biomaterials, 6, pp. 243-251; 
Ducheyne, P., Bioceramics: Material characteristics versus in vivo behavior (1987) J Biomed Mater Res, 21, pp. 219-236; 
Hyakuna, K., Yamamuro, T., Kotoura, Y., Oka, M., Nakamura, T., Kitsogi, T., Kokubo, T., Kushitani, H., Surface reactions of calcium phosphate ceramics to various solutions (1990) J Biomed Mater Res, 24, pp. 471-488; 
Santos, J.D., Reis, R.L., Monteiro, F.J., Knowles, J.C., Hastings, G.W., Liquid phase sintering of hydroxyapatite by phosphate and silicate glass additions: Structure and properties of the composites (1995) J Mater Sci Mater Med, 6, pp. 348-352; 
Tanahashi, M., Yao, T., Kokubo, T., Minoda, M., Miyamoto, T., Nakamura, T., Yamamuro, T., Apatite coated on organic polymers by biomimetic process: Improvement in adhesion to substrate by HC1 treatment (1995) J Mater Sci Mater Med, 6, pp. 319-326; 
Neo, M., Nakamura, T., Yamamuro, T., Ohtsuki, C., Kokubo, T., Bando, Y., A comparative study of ultrastructures of the interfaces between four kinds of surface-active ceramic and bone (1992) J Biomed Mater Res, 26, pp. 1419-1432; 
Li, P., Ohtsuki, C., Kokubo, T., Nakanishi, K., Soga, N., Nakamura, T., Yamamuro, T., Process of formation of bone-like apatite layer on silica gel (1993) J Mater Sci Mater Med, 4, pp. 127-131; 
Santos, J.D., Jha, L.J., Monteiro, F.J., Surface modifications of glass-reinforced hydroxyapatite composites (1995) Biomaterials, 16, pp. 521-526; 
Neo, M., Kotani, S., Fujita, Y., Yamamuro, T., Bando, Y., Ohtsuki, C., Kokubo, T., Differences in ceramic-bone interface between surface-active ceramics and resorbable ceramics: A study by scanning and transmission electron microscope (1992) J Biomed Mater Res, 26, pp. 255-267; 
Li, P., Yang, Q., Zhang, F., Kokubo, T., The effect of residual glassy phase in a bioactive glass-ceramic on the formation of its surface apatite layer in vitro (1992) J Mater Sci Mater Med, 3, pp. 452-456; 
Kotani, S., Fujita, Y., Kitsugi, T., Nakamura, T., Yamamuro, T., Bone bonding mechanism of β-tricalcium phosphate (1991) J Biomed Mater Res, 25, pp. 1303-1315; 
Daculsi, G., LeGeros Rz, H.M., Barbieux, I., Formation of carbonate-apatite crystals after implantation of calcium phosphate ceramics (1990) Calcif Tissue Int, 46, pp. 20-27; 
Silva, P.L., Monteiro, F.J., Santos, J.D., Knowles, J.C., Adhesion and microstructural characterisation of plasma sprayed hydroxyapatite-glass ceramic coatings onto Ti-6Al-4V substrates (1998) Surf Coatings Technol, 102, pp. 191-196; 
Kokubo, T., Kushitani, H., Ohtsuki, C., Sakka, S., Yamamuro, T., Chemical reaction of bioactive glass and glass-ceramics with a simulated body fluid (1992) J Biomed Mater Res, 3, pp. 79-83; 
Blakeslee, D.M., Dal-Favero, M.E., (1997) NIST X-ray Photoelectron Spectroscopy Database, , Gaitherburg, MD: National Institute of Standards and Technology; 
Anderson, O.H., Kangasniemi, I., Calcium phosphate formation at the surface of bioactive glass in vitro (1991) J Biomed Mater Res, 25, pp. 1019-1030; 
Santos, J.D., Jha, L.J., Monteiro, F.J., In vitro calcium phosphate formation on SiO 2-Na 2O-CaO-P 2O 5 glass reinforced hydroxyapatite composite: A study by XPS analysis (1996) J Mater Sci Mater Med, 7, pp. 181-185; 
Verhoeven, J.A.T., Van Doveren, H., An XPS investigation of the interface of methane, ethyne, ethene and ethane with barium surface (1982) Surf Sci, 123, pp. 369-383
},
	month = {1999///},
	pages = {376 - 383},
	publisher = {John Wiley \& Sons Inc},
	abstract = {Double-layer composite coatings composed of a P                        2O
                        5-based glass/Ca
                        10(PO
                        4)
                        6(OH)
                        2 (HA) mixture top layer and a simple HA underlayer, on Ti-6AI-4V substrates, were prepared using a plasma-spraying technique. The in vitro bioactivity of these coatings was assessed by immersion testing in simulated body fluid. Both scanning electron microscopy (SEM) analysis and the ionic solution changes followed by atomic absorption spectroscopy and the molybdenum blue method demonstrated that these composite coatings induce a faster surface Ca-P layer formation than the simple HA coatings used as a control. X-ray photoelectron spectroscopy (XPS) analysis demonstrated that the Ca-P layer formed was apatite. The combination of SEM and XPS analyses showed that the apatite layer was a calcium-deficient hydroxyapatite with a Ca/P ranging from 1.3 to 1.4 with CO
                        3
                        2- groups contained in the structure.
Double-layer composite coatings composed of a P
                        2O
                        5-based glass/Ca
                        10(PO
                        4)
                        6(OH)
                        2 (HA) mixture top layer and a simple HA underlayer, on Ti-6AI-4V substrates, were prepared using a plasma-spraying technique. The in vitro bioactivity of these coatings was assessed by immersion testing in simulated body fluid. Both scanning electron microscopy (SEM) analysis and the ionic solution changes followed by atomic absorption spectroscopy and the molybdenum blue method demonstrated that these composite coatings induce a faster surface Ca-P layer formation than the simple HA coatings used as a control. X-ray photoelectron spectroscopy (XPS) analysis demonstrated that the Ca-P layer formed was apatite. The combination of SEM and XPS analyses showed that the apatite layer was a calcium-deficient hydroxyapatite with a Ca/P ranging from 1.3 to 1.4 with CO
                        3
                        2- groups contained in the structure.
},
	keywords = {alloy, Alloys, Apatite, article, Atomic absorption spectroscopy, Atomic spectroscopy, Bioactivity, Biocompatibility, biomaterial, Biomaterials, Biomedical engineering, Body fluids, Calcium, Calcium Compounds, CaO SiO2 P2O5 CaF2 glass, CaO-SiO2-P2O5-CaF2 glass, Chemical analysis, chemical composition, Coated Materials, Biocompatible, Double layer coatings, Double-layer coatings, Durapatite, film, glass, Glass plasma spraying, human, Humans, hydroxyapatite, immersion, implant, in vitro study, Ionic solution changes, Magnesium, materials testing, Molybdenum blue, Multilayers, Particle Size, phosphate, Phosphate minerals, Phosphates, Phosphorus Compounds, phosphorus pentoxide, Plasma spraying, potassium, powder, Powders, resin cement, Resin Cements, Scanning electron microscopy, Sodium, solution and solubility, Solutions, structure analysis, Substrates, Surface Properties, surface property, thickness, Tissue, Titanium, titanium alloy (TiAl6V4), Titanium alloys, X ray photoelectron spectroscopy},
	isbn = {00219304 (ISSN)},
	url = {http://www.scopus.com/inward/record.url?eid=2-s2.0-0033563315\&partnerID=40\&md5=8c0de1e25709302641b203efac50337b},
	author = {Ferraz, M.P. and Monteiro, F.J. and Santos, J.D.}
}
@article {2586,
	title = {Adhesion and microstructural characterization of plasma-sprayed hydroxyapatite/glass ceramic coatings onto Ti-6Al-4V substrates},
	journal = {Surface and Coatings TechnologySurf. Coat. Technol.},
	volume = {102},
	year = {1998},
	note = {Cited By (since 1996): 41Export Date: 21 November 2012Source: ScopusLanguage of Original Document: EnglishCorrespondence Address: Silva, P.L.; INEB-Inst. de Engenharia Biomedica, Pra{\c c}a Coronel Pacheco 1, 4050 Porto, PortugalReferences: Aoki, H., (1991) Science and Medical Applications of Hydroxyapatite, p. 165. , Takayama Press System Center, JAAS, Tokyo;Barney, V.C., Levin, M.P., Adams, D.F., (1986) J. Periodont., 57, p. 764; 
Ducheyne, P., (1987) J. Biomed. Mater. Res. Appl. Biomater., 21, p. 219; 
Legeros, R.Z., (1988) Adv. Dent. Res., 2, p. 164; 
Williams, D., (1986) Medical and Dental Materials, , Pergamon Press; 
Akao, M., Haoki, K., Kato, (1981) J. Mater. Sci., 16, p. 809; 
With, G., Van Dijk, H., Hattu, N., Prijs, K., (1981) J. Mater. Sci., 16, p. 1592; 
Santos, J.D., Silva, P.L., Knowles, J.C., Monteiro, F.J., (1996) J. Mater. Sci. Mater. Med., 7, p. 187; 
Rey, C., (1990) Biomateriais, 11, p. 14; 
Evans, G., Behiri, J., Currey, J., Bonfield, B., (1990) J. Mater. Sci. Mater. Med., 1, p. 38; 
Matejka, D., Benko, B., (1989) Plasma Spraying of Metallic Materials, , Wiley, New York; 
Brown, S.D., (1984) Thin Sol. Films, 119, p. 127; 
Mittal, K.L., Adhesion Measurement of Thin Films, Thick Films and Bulk Coatings, , ASTM STP 840; 
ASTM D 1002, standard test method for strength properties of adhesive in shear by tension loading (1983) Annual Book of ASTM Standards; 
ASTM C 633-79, standard test method for adhesion or cohesive strength of flame sprayed coatings (1979) Annual Book of ASTM Standards Section 2; 
Ruiz, J., Gonz{\'a}lez, J.A., (1984) Rev. Metal., 20 (1). , Madrid
},
	month = {1998///},
	pages = {191 - 196},
	abstract = {Commercial hydroxyapatite (HA), Ca                        10(PO
                        4)
                        6(OH)
                        2, powders were reinforced with 4\% of a CaO-P
                        2O
                        5 based glass during its sintering process. Double layered coatings were obtained by Plasma Spraying and composed of 50 μm commercial HA, followed by a 50 μm (HA)/P
                        2O
                        5-CaO based glass composite coating. Samples were characterized by X-ray diffraction (XRD) analysis and it was shown that they were constituted of an HA matrix with small traces of tricalcium phosphate (β-TCP) phase. The XRD spectra were quite similar to those of commercial HA coatings. For coating to substrate adhesion two different tests were performed: adhesion tests according to ASTM C 633-79 and ASTM D 1002-83 standards. Higher values were obtained for ASTM C 633-79 than for ASTM D 1002-83, 35 and 15 MPa, respectively. This behavior is discussed in terms of the different stress effort applied to specimens. The results obtained with ASTM C 633-79 show that these double layered satisfy the stress requirements for load bearing biomedical applications. {\textcopyright} 1998 Published by Elsevier Science S.A.
},
	keywords = {Adhesion, Ceramic coatings, Characterization, coating, Hydroxyapatite glass ceramic coatings, materials testing, Mechanical properties, Microstructure, Phosphates, Plasma spraying, Stresses, Titanium aluminum vanadium substrates, X ray diffraction analysis, X-Ray Diffraction},
	isbn = {02578972 (ISSN)},
	url = {http://www.scopus.com/inward/record.url?eid=2-s2.0-0032047796\&partnerID=40\&md5=17fc09096386c9573405b63de4522e69},
	author = {Silva, P.L. and Santos, J.D. and Monteiro, F.J. and Knowles, J.C.}
}
@article {2621,
	title = {Crystallinity and structural changes in HA plasma-sprayed coatings induced by cyclic loading in physiological media},
	journal = {Journal of Materials Science: Materials in MedicineJ. MATER. SCI. MATER. MED.},
	volume = {7},
	year = {1996},
	note = {Cited By (since 1996): 13Export Date: 21 November 2012Source: ScopusCODEN: JSMMEdoi: 10.1007/BF00122009Language of Original Document: EnglishCorrespondence Address: Reis, R.L.; Dept. of Metallurgical Engineering, FEUP, Univ. of Porto, Rua dos Bragas, 4099 Porto Codex, PortugalReferences: Ji, H., Marquis, P.M., (1993) Biomaterials, 14, p. 64;Pfaff, H.G., Willmann, G., Henne, R., (1993) Proceedings of the 10th European Conference on Biomaterials, p. 110. , Davos, Switzerland, 1993, edited by B. Rahn (European Society for Biomaterials); 
Brown, S.D., (1984) Thin Solid Films, 119, p. 127; 
Geesink, R.G.T., (1988), PhD thesis, Univ. Leiden, The NetherlandsVan Blitterswijk, C.A., Grote, J.J., Kuypers, W., Blok-Van Hoek, C.J.G., Daems, W.Th., (1985) Biomaterials, 6, p. 243; 
Ribeiro, C.C., Barbosa, M.A., (1991) Bioceramics 4, p. 145. , edited by W. Bonfield, G. W. Hastings and K. Tanner (Butterworth-Heinemann London); 
Ducheyne, P., Healy, K.E., (1988) J. Biomed. Mater. Res., 22, p. 1137; 
Whitehead, R.Y., Lucas, L.C., Lacefield, W.R., (1993) Clin. Mater., 12, p. 31; 
De Bruijn, J.D., Davies, J.E., Flach, J.S., De Groot, K., Van Blitterswijk, C.A., (1992) Proceedings of the 4th World Congress on Biomaterials - Workshop on Biomaterials and Tissue Interactions, p. 23. , edited by U. Gross (Berlin); 
Morita, M., Sasada, T., Hayashi, H., Tsukamoto, Y., (1988) J. Biomed. Mater. Res., 22, p. 529; 
Brown, S.A., Farsnworth, L.J., Merritt, K., Crowe, T.D., (1988) J. Biomed. Mater. Res., 22, p. 321; 
Kummer, F., Jaffe, W., (1992) J. Appl. Biomater., 3, p. 211; 
Reis, R.L., Monteiro, F.J., Garrido, A., (1992) Bioceramics 5, p. 25. , Kyoto, November, 1992, edited by T. Yamamura, T. Kokubo and T. Nakamura (Kobunshi Kankokai, Tokyo); 
Reis, R.L., Monteiro, F.J., (1993) Bioceramics 6, p. 413. , Philadelphia, USA, 1993, edited by P. Ducheyne and D. Christiansen (Butterworth-Heinemann. New York); 
Reis, R.L., Monteiro, F.J., Hastings, G.W., (1994) J. Mater. Sci. Mater. Med., 5, p. 457; 
Reis, R.L., Monteiro, F.J., (1995) Proceedings of the NATO/ASI on Materials Science and Implant Orthopaedic Surgery II, p. 163. , Chania, Greesce, June 1994. edited by R. Kossowsky and N. Kossowsky (May, NATO/ASI series E: Applied Sciences, Kluwer Press, Amsterdam); 
Ji, H., Ponton, C.B., Marquis, P.M., (1992) J. Mater. Sci. Mater. Med., 3, p. 283; 
Weng, J., Liu, X., Zhang, X., Ma, Z., Ji, X., Zyman, Z., (1993) Biomaterials, 14, p. 578; 
De Groot, K., Klein, C.A.P.T., Wolke, J.G.C., Blieck-Hogervorst, J.M.A., (1990) Handbook of Bio-active Ceramics, 2, p. 133. , edited by T. Yamamuro, L. L. Hench and J. Wilson (CRC Press, Boca Raton, FL); 
Del{\'e}crin, J., Szumuckler-Moncler, S., Daculsi, G., Rieu, J., Duquet, B., (1991) Bioceramics 4, p. 311. , London, September, 1991, edited by W. Bonfield, G. W. Hastings and K. E. Tanner (Butterworth-Heinemann, London); 
De Bruijn, J.D., Flach, J.S., Leenders, H., Van der Brink, J., Van Blitterswijk, C., (1992) Bioceramics 5, p. 259. , Kyoto, November, 1992, edited by T. Yamamura, T. Kokubo and T. Nakamura (Kobunshi Kankokai, Tokyo)
},
	month = {1996///},
	pages = {407 - 411},
	publisher = {Chapman \& Hall Ltd},
	abstract = {In this study hydroxyapatite plasma-sprayed Ti-6A1-4V was characterized by X-ray diffraction (XRD) after being cyclically loaded, while immersed in two different testing environments: Hank{\textquoteright}s balanced salt solution (HBSS) and an isotonic saline solution (0.15m NaCl). An original method was developed to test these systems under cyclic bending, while immersed in the testing solution. The crystallinity of the coating was calculated, before and after testing. Crystallinity changes were related to coating dissolution rates, measured by atomic absorption spectroscopy (AAS) and by a photocolourimetric method using ascorbic acid. Structural changes induced either by the plasma-spraying procedure or due to corrosion-fatigue tests, namely a preferential dissolution of the coating{\textquoteright}s amorphous phase, were also found in X-ray diffraction patterns. Long-term immersion tests, without any applied load, were carried out for assessing cyclic loading effects. An immersion for 2 years in static conditions was found to be equivalent to a cyclic test of 27.8 h in the same solution, as measured by the changes on the coating structure and by the amount of coating material lost to the solution.In this study hydroxyapatite plasma-sprayed Ti-6Al-4V was characterized by X-ray diffraction (XRD) after being cyclically loaded, while immersed in two different testing environments: Hank{\textquoteright}s balanced salt solution (HBSS) and an isotonic saline solution (0.15M NaCl). An original method was developed to test these systems under cyclic bending, while immersed in the testing solution. The crystallinity of the coating was calculated, before and after testing. Crystallinity changes were related to coating dissolution rates, measured by atomic absorption spectroscopy (AAS) and by a photocolourimetric method using ascorbic acid. Structural changes induced either by the plasma-spraying procedure or due to corrosion-fatigue tests, namely a preferential dissolution of the coating{\textquoteright}s amorphous phase, were also found in X-ray diffraction patterns. Long-term immersion tests, without any applied load, were carried out for assessing cyclic loading effects. An immersion for 2 years in static conditions was found to be equivalent to a cyclic test of 27.8 h in the same solution, as measured by the changes on the coating structure and by the amount of coating material lost to the solution.
},
	keywords = {Absorption spectroscopy, article, ascorbic acid, atomic absorption spectrometry, Atomic absorption spectroscopy, balanced salt solution, Bending (deformation), Calculations, Characterization, Corrosion fatigue tests, crystal structure, Crystallinity, Cyclic bending, Dissolution, Fatigue testing, Hanks balanced salt solution, hydroxyapatite, Hydroxyapatite plasma sprayed coatings, immersion, implant, Isotonic saline solution, loading test, Long term immersion tests, materials testing, Modification, Photocolourimetric method, photometry, Plasma spraying, priority journal, sodium chloride, Sprayed coatings, Titanium alloys, Titanium aluminum vanadium alloys, X ray crystallography, X ray diffraction},
	isbn = {09574530 (ISSN)},
	url = {http://www.scopus.com/inward/record.url?eid=2-s2.0-0030199724\&partnerID=40\&md5=b47480a26cc5b628bc98bc98034c6c98},
	author = {Reis, R.L. and Monteiro, F.J.}
}
@article {2625,
	title = {Effect of hydroxyapatite thickness on metal ion release from Ti6Al4V substrates},
	journal = {BiomaterialsBIOMATERIALS},
	volume = {17},
	year = {1996},
	note = {Cited By (since 1996): 62Export Date: 21 November 2012Source: ScopusCODEN: BIMADdoi: 10.1016/0142-9612(96)89655-4PubMed ID: 8938233Language of Original Document: EnglishCorrespondence Address: Sousa, S.R.; INEB, Praca do Coronel Pacheco 1, 4050 Porto, PortugalChemicals/CAS: Alloys; Biocompatible Materials; Durapatite, 1306-06-5; titanium alloy (TiAl6V4), 12743-70-3; Titanium, 7440-32-6References: Barbosa, M.A., Electrochemical impedance studies on calcium phosphate-metal interfaces (1991) Bioceramics, 4, pp. 325-333. , Bonfield W, Hastings GW, Tanner KE, eds. London: Butterworth-Heinemann;Sousa, S.R., Barbosa, M.A., Electrochemistry of AISI 316L stainless steel in calcium phosphate and protein solutions (1991) J Mater Sci: Mater Med, 2, pp. 19-26; 
Sousa, S.R., Barbosa, M.A., Corrosion resistance of titanium cp in saline physiological solutions with calcium phosphate and proteins (1993) Clin Mater, 14, pp. 287-294; 
Li, P., De Groot, K., Calcium phosphate formation within sol-gel prepared titania in vitro and in vivo (1993) J Biomed Mater Res, 27, pp. 1495-1500; 
Li, P., Kangasniemi, I., De Groot, K., Bonelike hydroxyapatitc induction by a gel-derived titania and a titanium substrate (1994) J Am Ceram Soc, 77, pp. 1307-1312; 
Ducheyne, P., Healy, K.E., The effect of plasma-sprayed calcium phosphate ceramic coatings on the metal ion release from porous titanium and cobalt-chromium alloys (1988) J Biomed Mater Res, 22, pp. 1137-1163; 
Weng, J., Liu, X., Zhang, X., Li, X., Thermal decomposition of hydroxyapatite structure induced by titanium and its dioxide (1994) J Mater Sci Lett, 13, pp. 159-161; 
Castro Ribeiro, C., Barbosa, M.A., Influence of metal ions on the dissolution behaviour of hydroxyapatite (1991) Bioceramics, 4, pp. 145-153. , Bonfield W, Hastings GW, Tanner KE, eds. Butterworth-Heinemann; 
ASTM G61-86, standard test method for: Conducting cyclic potentiodynamic polarization measurements for localized corrosion susceptibility of iron, nickel, or cobalt based alloys (1989) Annual Book of ASTM Standards, pp. 345-361. , 03.02. Philadelphia, PA: American Society for Testing and Materials; 
ASTM G 31-72 e1, standard practice for: Laboratory immersion corrosion testing of metals (1989) Annual Book of ASTM Standards, pp. 176-186. , 03.02. Philadelphia, PA: American Society for Testing and Materials; 
Barbosa, M.A., Surface layers and the reactivity of metallic implants (1992) Biomaterials - Hard Tissue Repair and Replacement, pp. 257-283. , Muster D et al. ed. Amsterdam: Elsevier Science Publishers BV; 
Rivero, D.P., Fox, J., Skipor, A.K., Urban, R.M., Galante, J.O., Calcium phosphate-coated porous titanium implants for enhanced skeletal fixation (1988) J Biomed Mater Res, 22, pp. 191-201; 
Oonishi, H., Yamamoto, M., Ishimaru, H., The effect of hydroxyapatite coating on bone growth into porous titanium alloy implants (1989) J Bone Joint Surg, 71 B, pp. 213-216; 
Bourne, R.B., Rorabeck, C.H., Burkar, B., Kirk, P.G., Ingrowth surfaces - Plasma spray coating to titanium alloy hip replacements (1994) Clin Orthop Rel Res, 298, pp. 37-46; 
Oonishi, H., Noda, T., Ito, S., Effect of hydroxyapatite coatings on bone growth into porous titanium alloy implants under loaded conditions (1994) J Appl Biomater, 5, pp. 23-37; 
Moroni, A., Caja, V.L., Egger, E.L., Trinchese, L., Chao, E.Y.S., Histomorphometry of hydroxyapatite coated and uncoated porous titanium bone implants (1994) Biomaterials, 15, pp. 926-930; 
Bloebaum, R.D., DuPont, J.A., Osteolysis from a press-fit hydroxyapatite-coated implant (1993) J Arthroplasty, 8, pp. 195-202; 
Bloebaum, R.D., Beeks, D., Dorr, L.D., Savory, C.G., DuPont, J.A., Hofmann, A.A., Complications with hydroxyapatite particulate separation in total hip arthroplasty (1994) Clin Orthop, 298, pp. 19-26; 
Klein, C.P.A.T., Patka, P., Wolke, J.G.C., De Blieck-Hogervorst, J.M.A., De Groot, K., Long-term in vivo study of plasma-sprayed coatings on titanium alloys of tetracalcium phosphate, hydroxyapatite and α-tricalcium phosphate (1994) Biomaterials, 15, pp. 146-160; 
Reis, R.L., Monteiro, F.J., Hastings, G.W., Stability of hydroxyapatite plasma-sprayed coated Ti-6Al-4V under cyclic bending in simulated physiological solutions (1994) J Mater Sci: Mater Med, 5, pp. 457-462; 
Wang, B.C., Lee, T.M., Chang, E., Yang, C.Y., The shear strength and the failure mode of plasma-sprayed hydroxyapatite coating to bone: The effect of coating thickness (1993) J Biomed Mater Res, 27, pp. 1315-1327; 
Tranquilli Leali, P., Merolli, A., Palmacci, O., Gabbi, C., Cacchiolo, A., Gonizzi, G., Evaluation of different preparations of plasma-spray hydroxyapatite coating on titanium alloy and duplex stainless steel in the rabbit (1994) J Mater Sci: Mater Med, 5, pp. 345-349
},
	month = {1996///},
	pages = {397 - 404},
	publisher = {Elsevier Science Ltd},
	abstract = {The electrochemical dissolution behaviour of Ti6Al4V alloy coated with hydroxyapatite (HA) by plasma spraying was studied in Hank{\textquoteright}s balanced salt solution (HBSS) and compared with that of polished and grit-blasted passivated surfaces. Two different nominal thicknesses of HA (50 and 200 μm) were used. Taking a polished passivated surface as reference, grit blasting of the substrate increased the electrical charge used in the oxidation of Ti6Al4V alloy at constant potential, as a result of increased surface area. However, only HA coatings with a thickness of 200 μm were capable of reducing the charge to values lower than those measured for polished surfaces. Electrochemical impedance spectroscopy has also shown that only 200 μm thick coatings are effective in reducing the oxidation rate of the substrate. Furthermore, in potentiostatic experiments the 50 μm thick coating detached from the substrate, which did not occur with the 200 μm thick coating. However, after 6 months immersion in HBSS, detachment occurred in some regions of both coatings. No titanium, aluminium or vanadium were detected in solution by electrothermal atomic absorption spectroscopy. These data indicate that HA is an effective barrier to metal ion release, even for the thinner coatings, due to formation of metal phosphates or to incorporation of metal ions in the HA structure.The electrochemical dissolution behaviour of Ti6Al4V alloy coated with hydroxyapatite (HA) by plasma spraying was studied in Hank{\textquoteright}s balanced salt solution (HBSS) and compared with that of polished and grit-blasted passivated surfaces. Two different nominal thicknesses of HA (50 and 200 μm) were used. Taking a polished passivated surface as reference, grit blasting of the substrate increased the electrical charge used in the oxidation of Ti6Al4V alloy at constant potential, as a result of increased surface area. However, only HA coatings with a thickness of 200 μm were capable of reducing the charge to values lower than those measured for polished surfaces. Electrochemical impedance spectroscopy has also shown that only 200 μm thick coatings are effective in reducing the oxidation rate of the substrate. Furthermore, in potentiostatic experiments the 50 μm thick coating detached from the substrate, which did not occur with the 200 μm thick coating. However, after 6 months immersion in HBSS, detachment occurred in some regions of both coatings. No titanium, aluminium or vanadium were detected in solution by electrothermal atomic absorption spectroscopy. These data indicate that HA is an effective barrier to metal ion release, even for the thinner coatings, due to formation of metal phosphates or to incorporation of metal ions in the HA structure.
},
	keywords = {Absorption spectroscopy, Alloys, Aluminum, article, Atomic spectroscopy, balanced salt solution, Bioactive coatings, Biocompatible Materials, Biomaterials, Calcium Compounds, Dissolution, Durapatite, Electric charge, Electrochemical dissolution, Electrochemical impedance spectroscopy, electrochemistry, Electrothermal atomic absorption spectroscopy, Hank balanced salt solution, hydroxyapatite, Ion release, Ions, metal ion, Metal ion release, Metal phosphates, Microscopy, Electron, Scanning, Oxidation, Plasma spraying, potentiometry, priority journal, Spectrophotometry, Atomic, Spectroscopy, Substrates, thickness, Thickness effect, Time Factors, Titanium, Titanium alloys, vanadium},
	isbn = {01429612 (ISSN)},
	url = {http://www.scopus.com/inward/record.url?eid=2-s2.0-0030087995\&partnerID=40\&md5=ec5e4bddc601b37b0dbe58029dd679d4},
	author = {Sousa, S.R. and Barbosa, M.A.}
}
@article {2630,
	title = {The effect of hydroxyapatite thickness on metal ion release from stainless steel substrates},
	journal = {Journal of Materials Science: Materials in MedicineJ. MATER. SCI. MATER. MED.},
	volume = {6},
	year = {1995},
	note = {Cited By (since 1996): 18Export Date: 21 November 2012Source: ScopusCODEN: JSMMEdoi: 10.1007/BF00134324Language of Original Document: EnglishCorrespondence Address: Sousa, S.R.; INEB, Instituto Engenharia Biomedica, Praca do Coronel Pacheco, 1, 4050 Porto, Portugal},
	month = {1995///},
	pages = {818 - 823},
	publisher = {Chapman \& Hall Ltd},
	abstract = {The corrosion behaviour of 350 stainless steel coated with hydroxyapatite, HA, by plasma spraying was studied in Hank{\textquoteright}s Balanced Salt Solution, HBSS, and compared with that of polished passivated surfaces. Two different nominal thicknesses, 50 μm and 200 μm, corresponding to what one might consider a thin and a thick coating, respectively, were used. Only HA coatings with a thickness of 200 μm were capable of reducing the electrical charge consumed at constant potential to values lower than those measured for polished surfaces. However, no HA detachment occurred for both thicknesses, as opposed to what has been found in a previous work with Ti6A14V alloy coated with 50 μm HA. No iron, chromium or nickel were detected in solution by Atomic Absorption Spectroscopy with electrothermal atomization (ET-AAS). These elements were also absent from the bulk of the HA coating, both after a 6 month immersion period and electrochemical accelerated tests. The data indicate that in spite of the relatively low corrosion resistance of stainless steel as compared to that of titanium alloys, a thin (50 μm) HA coating prevents the release of metal ions, while remaining adherent to the substrate.The corrosion behaviour of 350 stainless steel coated with hydroxyapatite, HA, by plasma spraying was studied in Hank{\textquoteright}s Balanced Salt Solution, HBSS, and compared with that of polished passivated surfaces. Two different nominal thicknesses, 50 μm and 200 μm, corresponding to what one might consider a thin and a thick coating, respectively, were used. Only HA coatings with a thickness of 200 μm were capable of reducing the electrical charge consumed at constant potential to values lower than those measured for polished surfaces. However, no HA detachment occurred for both thicknesses, as opposed to what has been found in a previous work [1] with Ti6Al4V alloy coated with 50 μm HA. No iron, chromium or nickel were detected in solution by Atomic Absorption Spectroscopy with electrothermal atomization (ET-AAS). These elements were also absent from the bulk of the HA coating, both after a 6 month immersion period and electrochemical accelerated tests. The data indicate that in spite of the relatively low corrosion resistance of stainless steel as compared to that of titanium alloys, a thin (50 μm) HA coating prevents the release of metal ions, while remaining adherent to the substrate.
},
	keywords = {Absorption spectroscopy, atomic absorption spectrometry, Atomic absorption spectroscopy, Atomic spectroscopy, balanced salt solution, Calcium Compounds, Chromium, comparative study, conference paper, Corrosion, Corrosion behaviour, Electric charge, electrochemistry, Hank balanced salt solution, hydroxyapatite, immersion, Inorganic coatings, Ions, Iron, metal ion, Metal ion release, Nickel, Plasma spraying, priority journal, Stainless steel, Stainless steel substrates, Substrates, thickness, Thickness effect, Titanium, Titanium alloys},
	isbn = {09574530 (ISSN)},
	url = {http://www.scopus.com/inward/record.url?eid=2-s2.0-0029616612\&partnerID=40\&md5=d2be2280e7407eb6232225ae459f896f},
	author = {Sousa, S.R. and Barbosa, M.A.}
}
@article {2639,
	title = {Stability of hydroxylapatite plasma-sprayed coated Ti-6Al-4V under cyclic bending in simulated physiological solutions},
	journal = {Journal of Materials Science: Materials in MedicineJ. MATER. SCI. MATER. MED.},
	volume = {5},
	year = {1994},
	note = {Cited By (since 1996): 35Export Date: 21 November 2012Source: ScopusCODEN: JSMMEdoi: 10.1007/BF00058983Language of Original Document: EnglishCorrespondence Address: Reis, R.L.; INEB-National Inst. Biomedical Engn., Faculty of Engineering, University of Porto, Rua dos Bragas, 4099 Porto Codex, Portugal},
	month = {1994///},
	pages = {457 - 462},
	publisher = {Chapman \& Hall Ltd},
	abstract = {The aim of this research was to study the stability of plasma-sprayed coated metal systems and to evaluate their susceptibility to the occurrence of corrosion fatigue. Hydroxylapatite plasma-sprayed coated samples of Ti-6Al-4V were studied under cyclic bending. During fatigue testing samples were immersed in a simulated physiological solution and mechanical and electrochemical degradation were monitored. Applied loads were intended to crack the ceramic coating and not the metal substrate. Electrochemical impedance spectroscopy was used to further characterize the electrochemical behaviour. No increase in tendency to corrode was detected in open-circuit corrosion fatigue testing. It appears as if the coating cracking does not increase metal substrate corrosion susceptibility. The coating integrity has been seriously affected, with marked decrease in thickness, due to the synergistic effect of load and presence of simulated body fluids environment. Impedance results, however, show a general tendency to an increase in corrosion kinetics after corrosion fatigue testing.The aim of this research was to study the stability of plasma-sprayed coated metal systems and to evaluate their susceptibility to the occurrence of corrosion fatigue. Hydroxylapatite plasma-sprayed coated samples of Ti-6Al-4V were studied under cyclic bending. During fatigue testing samples were immersed in a simulated physiological solution and mechanical and electrochemical degradation were monitored. Applied loads were intended to crack the ceramic coating and not the metal substrate. Electrochemical impedance spectroscopy was used to further characterize the electrochemical behaviour. No increase in tendency to corrode was detected in open-circuit corrosion fatigue testing. It appears as if the coating cracking does not increase metal substrate corrosion susceptibility. The coating integrity has been seriously affected, with marked decrease in thickness, due to the synergistic effect of load and presence of simulated body fluids environment. Impedance results, however, show a general tendency to an increase in corrosion kinetics after corrosion fatigue testing.
},
	keywords = {article, Bending (deformation), biomaterial, biomechanics, body fluid, Ceramic coatings, ceramics, controlled study, Corrosion, Corrosion fatigue, Corrosion susceptibility, Degradation, Electrochemical impedance spectroscopy, electrochemistry, fatigue, Fatigue testing, hydroxyapatite, impedance, mechanical stress, Physiological solutions, Plasma spraying, priority journal, sodium chloride, Solutions, Spectroscopy, Stability, Substrates, thickness, Titanium, Titanium alloys},
	isbn = {09574530 (ISSN)},
	url = {http://www.scopus.com/inward/record.url?eid=2-s2.0-0028447410\&partnerID=40\&md5=f863751be3003b31534dd128601835f8},
	author = {Reis, R.L. and Monteiro, F.J. and Hastings, G.W.}
}
